Specifications

Design-in guide Philips Fortimo LED Line High Voltage System 36
LED Line Cover 2ft soft-diffuse
The LED Line Cover 2ft soft-diffuse makes it easy for OEMs to redesign
their traditional fluorescent-based open-louver and Class I luminaires
(especially T8 solutions) to LED-based luminaires. This cover was
developed for the Philips LED Line range – specifically all Fortimo LED
Line 1R products and the Core LED Line. By improving the homogeneity
of the light output from the LED Lines the cover eliminates pixelation
and therefore assures high-quality, attractive diffuse white light output.
The LED Line Cover 2ft soft-diffuse consists of five parts – a diffuser, two
end-cap tops and two end-cap bottoms – and ensures dust-free LEDs
and easy cleaning.
Suitability
The LED Line Cover 2ft soft-diffuse can be used with the following products:
Type
12NC
Fortimo LED Line 1ft 1100lm 830 1R LV1
9290 006 91503
Fortimo LED Line 1ft 1100lm 835 1R LV1
9290 006 91603
Fortimo LED Line 1ft 1100lm 840 1R LV1 -
9290 006 91703
Fortimo LED Line 1ft 1100lm 850 1R LV1 -
9290 006 91803
Fortimo LED Line 1ft 1100lm 865 1R LV1
Available Q1 2013
* Availability differs by region: see page 5.
Mechanical
Dimensions
LED Line Cover 2ft Soft-diffuse
Nominal
Tolerance
Length [mm]
570
+2
Width at end-cap [mm]
46
+1
Width at diffuser [mm]
44
+1
Height at end-cap [mm]
32
+1
Height at diffuser [mm]
30
±0.5
Length of light-emitting surface [mm]
550
-2
Cable feed-through size [mm]
4.5 x 2.5
49
570
323