Specifications

Design-in guide Philips Fortimo LED Line High Voltage System 12
Mechanical characteristics
About the Philips Fortimo LED Line
The LED Line consists of a PCB assembly with components:
 LEDs
 Connectors (to connect another LED Line or Xitanium driver).
Please note that LED Line 1R can be connected to another 1R but not to 3R nor
to 2R. Same is valid for LED line 3R which can be connected only to another 3R
and likewise LED line 2R can only be connected to another 2R.
The LED Line consists of a carrier with current-conducting copper tracks, which also
acts as a heat spreader. The heat spreader facilitates optimum transfer of heat to the
air. The PCBA has 4 screw holes for fixing it to the mounting plate with M4 screws.
No specific heat sinks are needed (see section entitled „Thermal management‟). The
applied LEDs contain a zener diode that protects against electrostatic discharge
(ESD).
Fortimo LED Line 3R layout
Fortimo LED Line 1R layout
Fortimo LED Line 2R layout