Specifications

Design-in guide Philips Fortimo LED Line High Voltage System 10
System configurations with LED Line 2ft 2200 lm 1R HV1
For LED Line 2ft 2200 lm 1R HV1 the resistor values are chosen to obtain a nominal
flux of 2200 lm per LED Line (4000 K).
Number of
Fortimo LED Line
2ft 2200lm 1R HV1
Driver
Cable
1
Xitanium 36 W
LED Line cable 600 mm 432r 1C HV NTC
2
Xitanium 75 W
LED Line cable 600 mm 432r 1C HV NTC
3
Xitanium 75 W
LED Line cable 600 mm 432r 1C HV NTC
Warning
In cases where the OEM chooses to set the current (either by
programming or by applying a Rset resistor), the lifetime and reliability
of the LED Line must be taken into account. The following current
regions can be distinguished:
1. Current < nominal current
a. Lifetime > 50,000 hours
b. Efficiency higher than nominal value, lumen output lower
than nominal value
2. Current between nominal current and max. current for lifetime
a. Lifetime > 50,000 hours
b. Efficiency lower than nominal value, lumen output higher
than nominal value
3. Current between max. current for lifetime and absolute max.
current. No warranty applicable in this case.
a. Lifetime < 50,000 hours
b. Efficiency lower than nominal value, lumen output higher
than nominal value
4. Current > absolute maximum current: do not exceed the absolute
maximum current as this can lead to LED line failure. No warranty
applicable in this case.
Currents
Fortimo LED Line
I nominal*
mA
I life**
mA
I max***
mA
LED Line 1ft 650 lm 3R HV1
160
185
225
LED Line 1ft 1100 lm 3R HV1
260
400
400
LED Line 2ft 2200 lm 1R HV1
280
280
400
LED Line 2ft 1250 lm 2R HV1
306
370
400
* Nominal current at which performance is specified
** Current at which lifetime is specified
*** Maximum current for safety
The rated average life is based on engineering data testing and probability analysis.
The hours are at the L70 B50 point.
Specifications
The latest up-to-date detailed specifications can be found at
www.philips.com/technology