Specifications

26. Attach the Air Intake Assembly. The non-threaded end attaches to the pipe
click, and the 1” union attaches to the Venturi’s Air Intake valve. Align
straight, as shown in Fig. 26.
27. Hand-tighten the unions described in steps 25a and 25b, above.
28. Attach the Air Gauge by inserting over the end of the Air Intake Assembly
and fasten it with the adjacent pipe click, as shown in Fig. 28.
WARNING: DO NOT GLUE the Air Gauge to the Air Intake
Assembly. Maintenance requires that this component be
removed and cleaned periodically.
Fig. 26 Fig. 28