e-Manual Philips LCD Monitor Electronic User’s Manual file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/INDEX.
Safety and Troubleshooting Information Safety Precautions and Maintenance FAQs Troubleshooting Regulatory Information Safety and Troubleshooting Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.
Safety and Troubleshooting Information ● ● ● Do not store or use the LCD monitor in locations exposed to heat, direct sunlight or extreme cold. In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges. ❍ Temperature: 0-40°C 32-95°F ❍ Humidity: 20-80% RH IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended.
FAQs (Frequently Asked Questions) Safety and Troubleshooting FAQs (Frequently Asked Questions) General FAQs Compatibility with Other Peripherals LCD Panel Technology Ergonomics, Ecology and Safety Standards Troubleshooting Regulatory Information General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? A: Recommended resolution for Philips 21.5": 1920x1080 @60Hz. 1. Unplug all cables, then connect your PC to the monitor that you used previously.
FAQs (Frequently Asked Questions) Q4: How do I adjust the resolution? A: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties". Q5: What if I get lost when I am making monitor adjustments? A: Simply press the OK button, then select 'Reset' to recall all of the original factory settings.
FAQs (Frequently Asked Questions) b. sRGB; this is a standard setting for ensuring correct exchange of colors between different device (e.g. digital cameras, monitors, printers, scanners, etc) c. User Define; the user can choose his/her preference color setting by adjusting red, green blue color. *A measurement of the color of light radiated by an object while it is being heated. This measurement is expressed in terms of absolute scale, (degrees Kelvin).
FAQs (Frequently Asked Questions) LCD Panel Technology Q12: What kind of wide-angle technology is available? A: Currently, the IPS type panels offer the best Contrast Ratio, compared to MVA, or PVA technologies. TN panels have improved over the years, but still cannot match the Contrast Ratio offered by IPS panel.
FAQs (Frequently Asked Questions) RETURN TO TOP OF THE PAGE file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/safety/saf_faq.
Troubleshooting Safety and Troubleshooting FAQs Common Problems Imaging Problems Regulatory Information Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
Troubleshooting ● Image vibrates on the screen Check that the signal cable is properly securely connected to the graphics board or PC. Vertical flicker appears ● ● Press the Auto button. Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. Horizontal flicker appears ● Press the Auto button. Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. ● Adjust the contrast and brightness on On-Screen Display.
Troubleshooting For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. RETURN TO TOP OF THE PAGE file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/safety/saf_troub.
Regulatory Information Recycling Information for Customers Waste Electrical and Electronic Equipment-WEEE Ergonomie Hinweis (nur Deutschland) Philips End-of-Life Disposal Regulatory Information Available for selective models China RoHS Recycling Information for Customers Lead-free Product There is currently a system of recycling up and running in the European countries, such as The Netherlands, Belgium, Norway, Sweden and Denmark.
Regulatory Information EPEAT “The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process supported by US EPA. EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes.
Regulatory Information Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklem Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelastung bei zu geringem Zeichenkontrast wären die Folge). Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70dB (A) oder weniger. ACHTUNG: BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND.
Regulatory Information 环保使用期限 此标识指期限(十年),电子信息产品中含有的有毒有害物质或元素在正常使用的条件下不会发生外泄 或突变, 电子信息产品用户使用该电子信息产品不会对环境造成严重污染或对其人身、 财产造成严 重损害的期限． RETURN TO TOP OF THE PAGE file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/safety/regs/regulat.
Regulatory Information Lead-free Product Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle.
About This Manual About This Guide About This Manual Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor. It describes the LCD monitor's features, setup, operation and other important information. Its contents are identical to the information in our printed version.
About This Manual Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows: NOTE: This icon indicates important information and tips that help you make better use of your computer system. CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data.
Product Information Your LCD Monitor SmartContrast Product Information SmartSaturate SmartSharpness Technical Specifications Resolution & Preset Modes Your LCD monitor Congratulations on your purchase and welcome to Philips. To fully benefit from the support that Philips offers, register your product at. www.philips.
Product Information SmartSaturate dynamically controls color saturation - the degree to which on-screen color is diluted by neighboring colors - to deliver rich, vibrant display for more entertainment fun when you are viewing images or videos in your display's Entertainment mode and is turned off for top quality display of office application and in the Economy mode to reduce power consumption.
Product Information Picture Enhancement N/A Display colors 16.
Product Information Temperature range (operation) 0° C to 40 ° C Temperature range (storage) -20° C to 60° C Relative humidity 20% to 80% Non-operation: + 40,000 ft ( 12,192 m) Altitude Operation: + 12,000 ft ( 3,658 m) 50000 hrs MTBF Environmental ROHS YES EPEAT sliver Packaging 100% recyclable Cabinet Color Black/Black Finish Textured * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes A.
Product Information H. freq (kHz) Resolution V. freq (Hz) 31.47 720*400 70.09 31.47 640*480 59.94 37.50 640*480 75.00 37.88 800*600 60.32 46.88 800*600 75.00 48.36 1024*768 60.00 60.02 1024*768 75.03 44.77 1280*720 59.86 49.70 1280*800 59.81 63.98 1280*1024 60.02 79.98 1280*1024 75.03 67.50 1920*1080 60.
Product Information The native resolution of the monitor is 1920 x 1080. By default, your monitor has 100% (max.) 50% contrast, and 6500K color temperature, with full white pattern. RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its components.
Philips Pixel Defect Policy Product Features Philips Pixel Defect Policy Technical Specifications Resolution & Preset Modes Philips' Flat Panel Monitors Pixel Defect Policy Automatic Power Saving Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control. However, pixel or sub pixel defects on the TFT LCD panels used in flat panel monitors are sometimes unavoidable.
Philips Pixel Defect Policy Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit or 'on'. That is, a bright dot is a sub-pixel that stands out on the screen when the monitor displays a dark pattern.
Philips Pixel Defect Policy Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
Philips Pixel Defect Policy * 1 or 2 adjacent sub pixel defects = 1 dot defect RETURN TO TOP OF THE PAGE file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/product/pixel.
Installing Your LCD Monitor Installing Your LCD Monitor Front View Produt Description Connecting to Your PC The Base Front View Product Description Getting Started Protective Cover (Optional) Optimizing Performance 1 To switch monitor's power On and Off 2 To access the OSD menu 3 To adjust the OSD menu 4 To adjust brightness of the display 5 Change to 4:3 display 6 Automatically adjust the horizontal position, vertical position, phase and clock settings / Return to previous OSD level file://
Installing Your LCD Monitor 7 Dim down to 70% of brightness level by one touch RETURN TO TOP OF THE PAGE Rear View 1 VGA input 2 DVI-D input (available for selective models) 3 AC power input 4 Kensington anti-thief lock RETURN TO TOP OF THE PAGE Optimizing Performance file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/INSTALL/INSTALL.
Installing Your LCD Monitor ● For best performance, ensure that your display settings are set at 1920x1080, 60Hz. Note: You can check the current display settings by pressing the 'OK' button once. The current display mode is shown in OSD main controls called RESOLUTION. RETURN TO TOP OF THE PAGE file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/INSTALL/INSTALL.
Connecting to Your PC Front View Product Description Accessory Pack Connecting to Your PC Protective Cover (Optional) Getting Started Connecting to Your PC Accessory Pack Unpack all the parts. Optimizing Performance The Base Power cord DVI cable (Optional) VGA cable (Optional) EDFU pack Base Screws RETURN TO TOP OF THE PAGE Connecting to Your PC file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/install/connect.
Connecting to Your PC 1) Connect the power cord to the back of the monitor firmly. (Philips has pre-connected VGA cable for the first installation. *available for selective models file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/install/connect.
Connecting to Your PC *available for selective models 2) Connect to PC (a) Turn off your computer and unplug its power cable. (b) Connect the monitor signal cable to the video connector on the back of your computer. (c) Plug the power cord of your computer and your monitor into a nearby outlet. (d) Turn on your computer and monitor. If the monitor displays an image, installation is complete.
The Base Front View Product Description Accessory Pack Connecting to your PC Protective Cover (Optional) Getting Started The Base Attach the Base Stand 1) Place the monitor face down on a smooth surface taking care to avoid scratching or damaging the screen. Optimizing Performance Attach the Base Stand Fixing the Anti-theft base of the monitor Detach the Base Stand Remove the Base 2) Hold the monitor base with both hands and firmly insert the base stand into the base column.
The Base Fixing the Anti-theft base of the monitor 1) Place the monitor on a firm work surface /table. 2) Secure the anti-theft base to the table by firmly fixing two screws through two holes located on the rear of the base. RETURN TO TOP OF THE PAGE Detach the Base Stand Place the monitor face on a safe surface, push down on the release button and pull the base file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/INSTALL/BASE.
The Base stand away from the monitor body. RETURN TO TOP OF THE PAGE Remove the Base Condition: ● for VESA standard mounting applications Remove the 4 screws covers. Remove the 4 screws and then remove the base from the LCD monitor. file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/INSTALL/BASE.
The Base file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/INSTALL/BASE.
The Base Note: This monitor accepts a 100mmx100mm VESA-Compliant mounting interface. RETURN TO TOP OF THE PAGE file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/INSTALL/BASE.
Getting Started Your LCD Monitor : Front View Product Description Setting Up and Connecting Your Monitor Protective Cover (Optional) Getting Started Optimizing Performance Getting Started Getting Started Use the information file ( .inf) for Windows® 2000/XP/Vista or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows® 2000/XP/Vista. This information file ( .
Getting Started 7. 8. 9. 10. 11. 12. 13. 14. - If the 'Properties' button is active, click on 'Properties' button. Please follow the steps below. Click on the 'Driver' tab and then click on 'Update Driver...' button. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. Click on the 'Have disk...' button, then click on the 'Browse...
Protective Cover (Optional) Protective Cover (Optional) Front View Produt Description Connecting to Your PC The Base Getting Started Optimizing Performance Protective Cover Installation To protect the LCD Panel of the monitor, you can install a optional protective cover. Please contact your Philips representative for more information. Note: Protective cover dimension: 275.91x483.54x2.5 mm (WxLxD) 1) Pull the strip from the bottom of the screen. 2) Remove the FlexiBezel.
Protective Cover (Optional) 3) Unfasten 2 screws. 4) Insert the protective cover into the slot at the bottom of the screen. file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/INSTALL/PLATE.
Protective Cover (Optional) 5) Raise the caps on the top of the monitor a little to allow the protective cover to fit into the caps then lower the caps back so that it holds the protective cover. 6) Fasten the screws back on the caps so that it firmly holds the protective cover. file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/INSTALL/PLATE.
Protective Cover (Optional) 7) Attach the FlexiBezel back. RETURN TO TOP OF THE PAGE Remove Protective Cover 1) Remove the FlexiBezel. file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/INSTALL/PLATE.
Protective Cover (Optional) 2) Loosen the screws from the caps then raise the caps a little to allow the protective cover to come out. file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/INSTALL/PLATE.
Protective Cover (Optional) 3) Fasten the screws back on the caps. 4) Attach the FlexiBezel back. file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/INSTALL/PLATE.
Protective Cover (Optional) RETURN TO TOP OF THE PAGE file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/INSTALL/PLATE.
On-Screen Display Description of the On-Screen Display On-Screen Display The OSD Tree Description of the On Screen Display What is the On-Screen Display? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below : Basic and simple instruction on the control keys.
On-Screen Display The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/osd/osddesc.
On-Screen Display Resolution notification This monitor is designed for optimal performance at its native resolution, 1920X1080@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920X1080@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu. RETURN TO TOP OF THE PAGE file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/215i2/osd/osddesc.
Customer Care & Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR WARRANTY COVERAGE WESTERN EUROPE: Austria Belgium Denmark France Germany Greece Finland Ireland Italy Luxembourg the Netherlands Norway Portugal Sweden Switzerland Spain United Kingdom Poland EASTERN EUROPE: Czech Republic Hungary Russia Slovakia Slovenia Turkey LATIN AMERICA: Argentina Brasil NORTH AMERICA: Canada USA PACIFIC: Australia New Zealand ASIA: China Hong Kong India Indonesia Korea Malaysi
Your Philips F1rst Choice Warranty Your Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact the Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty.
Your Philips F1rst Choice Warranty ● ● ● ● Reception problems caused by signal conditions or cable or antenna systems outside the unit; Defects caused by abuse or misuse of the monitor; Product requires modification or adaptation to enable it to comply with local or national technical standards, which apply in countries for which the product was not originally designed, manufactured, approved and/or authorized. Therefore always check whether a product can be used in a specific country.
Your Philips F1rst Choice Warranty file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/warranty/war_1st.
F1rst Choice Contact Information F1rst Choice Contact Information Country Code Telephone number Tariff Austria +43 0810 000206 € 0.07 Belgium +32 078 250851 € 0.06 Denmark +45 3525 8761 Local call tariff Finland +358 09 2290 1908 Local call tariff France +33 082161 1658 € 0.09 Germany +49 01803 386 853 € 0.09 Greece +30 00800 3122 1223 Free of charge Ireland +353 01 601 1161 Local call tariff Italy +39 840 320 041 € 0.
Your Guarantee in Central and Eastern Europe Your Guarantee in Central and Eastern Europe Dear Customer, Thank you for purchasing this Philips product, which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts during a period of 36 months from date of purchase.
Your Guarantee in Central and Eastern Europe become necessary in order for the product to comply with local or national technical standards which apply in countries for which the product was not originally designed and/or manufactured. Therefore always check whether a product can be used in a specific country. Just a click away In case of any problems, we advise you to read the operating instructions carefully or go to the www. philips.com/support website for additional support.
Consumer Information Centers Consumer Information Centers Argentina Australia Brasil Canada New Zealand Belarus Bulgaria Croatia Czech Republic Estonia United Arab Emirates Hong Kong Hungary India Indonesia Israel Latvia Lithuania Malaysia Middle East + North Africa New Zealand Pakistan Romania Russia Serbia & Montenegro Singapore Slovakia Slovenia South Africa South Korea Taiwan Philippines Thailand Turkey Ukraine Vietnam Eastern Europe BELARUS Technic al Center of JV IBA M. Bogdanovich str.
Consumer Information Centers CROATIA Renoprom d.o.o. Ljubljanska 4, Sv. Nedjelja,10431 Croatia Tel: +385 1 333 0974 ESTONIA FUJITSU SERVICES OU Akadeemia tee 21G EE-12618 Tallinn Tel: +372 6519900 www.ee.invia.fujitsu.com HUNGARY Serware Szerviz Vizimolnár u. 2-4 HU - 1031 Budapest Tel: +36 1 2426331 Email: inbox@serware.hu www.serware.hu HUNGARY Profi Service Center Ltd. 123 Kulso-Vaci Street, H-1044 Budapest ( Europe Center ) Hungary Tel: +36 1 814 8080 m.andras@psc.
Consumer Information Centers ROMANIA Blue Ridge Int'l Computers SRL 115, Mihai Eminescu St., Sector 2 RO - 020074 Bucharest Tel: +40 21 2101969 SERBIA & MONTENEGRO Kim Tec d.o.o. Viline vode bb, Slobodna zona Beograd L12/3 11000 Belgrade Serbia Tel. +381 11 20 70 684 SLOVAKIA General Consumer Information Center 0800004551 Datalan Servisne Stredisko Puchovska 8 SK - 831 06 Bratislava Tel: +421 2 49207155 Email: servis@datalan.
Consumer Information Centers TURKEY Türk Philips Ticaret A.S. Yukari Dudullu Org.San.Bolgesi 2.Cadde No:22 34776-Umraniye/Istanbul Tel: (0800)-261 33 02 UKRAINE Comel Shevchenko street 32 UA - 49030 Dnepropetrovsk Tel: +380 562320045 www.csp-comel.com LLC Topaz Company Topaz-Service Company, Mishina str. 3, Kiev Ukraine-03151 Tel: +38 044 245 73 31 Latin America ARGENTINA Azopardo 1480. (C1107ADZ) Cdad. de Buenos Aires Tel: 0800 3330 856 Email: CIC.monitores@Philips.
Consumer Information Centers AUSTRALIA Company: AGOS NETWORK PTY LTD Address: 4/5 Dursley Road, Yenorra, NSW 2161, Australia Tel: 1300 360 386 Fax: +61-2-80808147 Email: philips@agos.com.au Service hours: Mon.~Fri. 8:00am-7:30pm NEW ZEALAND Company: Visual Group Ltd. Address: 28 Walls Rd Penrose Auckland Phone: 0800 657447 Fax: 09 5809607 E-mail: vai.ravindran@visualgroup.co.nz Service Hours: Mon.~Fri. 8:30am~5:30pm Asia HONG KONG/Macau Company Name: PHK Service Limited Address: Flat A, 10/F.
Consumer Information Centers Indonesia Company Name: PT. Gadingsari elektronika Prima Address: Kompleks Pinang 8, Jl. Ciputat raya No. 8F, Pondok Pinang. Jakarta Tel: 021-750909053, 021-750909056 Fax: 021-7510982 E-mail: gepta@cbn.net.id Service hours: Mon.~Fri. 8:30am~4:30pm; Sat. 8:30am~2:00pm Additional service points: 1. Philips Building Jl. Buncit Raya Kav 99. Jakarta Selatan. Phone: 021-7940040, ext 1722/1724, 98249295, 70980942 2. Jl. Tanah Abang 1 no 12S. Jakarta Pusat.
Consumer Information Centers Singapore Company: Philips Electronics Singapore Pte Ltd (Philips Consumer Care Center) Address: 620A Lorong 1 Toa Payoh, TP4 Building Level 1, Singapore 319762 Tel: (65) 6882 3999 Fax: (65) 62508037 E-mail: consumer.care.sg@philips.com Service hours: Mon.~Fri. 9:00am~6:00pm; Sat. 9:00am~1:00pm Taiwan Company: FETEC.CO Address: 3F, No.6, Lane 205, Sec. 1, Chang Hsing Rd, Lu Chu Hs, Taoyuan, Taiwan R.O.
Consumer Information Centers 4th Level Cyberzone, Annex Bldg. SM City North EDSA, Quezon City 441-1610 MDR Microware Sales Inc. Cebu Branch N. Escario corner Clavano St., Cebu City Phils. # 255-4415/ 255-3242/253-9361/4124864 to 67 Sun # 0922-8210045 to 46 Davao Office: C. Arellano St., Davao City 8000 082- 225-3021/225-3022 Sun# 0922-8210015 CDO Office: 1445 Corrales Ext.,CDO City 088-856-8540/856-8541 Sun # 0922-8210080 Iloilo Office: C. Lim Comp., Gomez St.
Consumer Information Centers Middle East + North Africa Company: AL SHAHD COMPUTER L.L.C Address: P.O.BOX: 29024, DUBAI, UNITED ARAB EMIRATES TEL: 00971 4 2276525 FAX: 00971 4 2276242 E-mail: shahd52@eim.ae Service hours: Sat.~Thur. 9:00am~1:00pm & 4:00pm- 8:00pm Israel Company: Eastronics LTD Address: 13 Rozanis St. P.O.B. 39300, Tel Aviv 61392 Israel Tel: 1-800-567000 call free in Israel; (972-50-8353722 after service hours until 20:00) Fax: 972-3-6458759 E-mail: eastronics@eastronics.co.
International Guarantee Your International Guarantee Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts irrespective of the country where it is repaired during a period of 12 months from date of purchase.
International Guarantee file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/warranty/war_intl.
United States Guarantee Your Philips F1rst Choice Warranty(USA) Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact Philips directly to benefit from your Philips F1rst Choice Warranty.
United States Guarantee Your warranty does not cover: ● ● ● ● ● ● labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product. product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips Consumer Electronics. reception problems caused by signal conditions or cable or antenna systems outside the unit.
United States Guarantee (877) 835-1838 or (919) 573-7855 (In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.) TO GET WARRANTY SERVICE IN CANADA...
United States Guarantee ● ● ● Other cards installed Having the following information available will also help speed up the process: Your proof of purchase indicating: date of purchase, dealer name, model and product serial number. The full address to which the swap model should be delivered. Just a phone call away Philips customer help desks are located worldwide. Within the U.S.
Download and Print Download and Print Installing your LCD monitor driver Download and Printing Instructions Installing Your LCD monitor driver System requirements: ● ● PC running Windows® XP, Windows® Vista, Windows® 7 or later Find your driver ".inf/.icm/.cat" at : /PC/drivers/ Read the "Readme.txt" file before installing. Add” refer to http://www.p4c.philips.com/ to download the latest version of monitor drivers.” This page provides an option to read the manual in .pdf format.
Download and Print Printing instructions: To print the manual: With the manual file open, follow your printer's instructions and print the pages you need. RETURN TO TOP OF THE PAGE file:///G|/LCD%20Monitor%20OEM/Philips/M2-project/215i2/215i2-EDFU/CD-Contents/lcd/manual/ENGLISH/download/download.
