Specifications

8
TPF1.3A LA
Top Control
Menu
Right
Left
-
Volume
+
UpDown
-
Channel
+
<B> <C> <D> <E> <F>
Front Control
Power SW
RC sensor
LED
<A>
After 52 seconds,
bring up:
----------
----------
repeatly
Connect Signal cable again=> go back to normal display
After 52 seconds,
bring up:
After 60 seconds,
bring up:
Factory Mode indicator
Factory Menu
Cursor can move on gray color area
Hot key function: at factory mode , press "MENU" button,then press
"+"and"-"ofChannel to the factory mode indicator ,then press
" + " of Volume .Press the " + " and "-"ofChannel to "exit " and
press "MENU" to exit factory adjust menu.
AGING...
AGING...
AGING...
5.1 Access Aging Mode
Step 1 : D
Step 2 :
untill
comes out " AGING screen"] => then release all buttons.
Bring up:
isconnect Interface Cable between Monitor and PC.
Turn off LCD monitor.Then press power " " button.Then
quickly push " + "and "-"ofVolume,and hold this two buttons
5.2 Access Factory Mode
1). Turn off monitor.
2).
3). Press "MENU" button, wait until the OSD menu with
Characters "CHINA MAGNAVOX32 V0.2.0 051012
CLAA320WA01" (below OSD menu) come on the Screen
of the monitor.
Press power " " button.Then quickly push " + " and " - "of
Volume ,and hold this two buttons , then the screen comes out
"Waiting For Automatic Adjustment ",then the screen will be black
for one second untill comes out "Windows screen"] => then
release this two buttons.
5. Aging and Factory Mode
index of this chapter:
5.1 Access Aging Mode
5.2 Access Factory Mode
5. Aging and Factory Mode
[url=http://www.hqjdw.com/register.php?fromuser=乖乖狗]
红旗家电维修论坛，游客都可以下载资料[/url]
乖乖狗制作，严禁转载
http://www.hqjdw.com/?fromuid=乖乖狗