Specifications

TPF1.3A LA

4. Mechanical Instructions

In warranty, it is not allowed to disassembly the LCD panel, even the

backlight unit defect.

Out of warranty, the replacment of backlight unit is a correct way

when the defect is cused by backlight (CCFL,Lamp).

Fig. 13

Fig. 14

Fig. 16

Set Re-assembly

To re-assemble the whole set, execute all processes in reverse

order.

Notes:

a. While re-assembling, make sure that all cables are placed

and connected in their original position.

b. Pay special attention not to damage the EMC foams at the

SSB shielding. Check that EMC foams are put correctly on

their places.

e). Remove the control board and open the click ,disconnect the

connector as Fig.14-Fig.15

Fig.11

Fig.12

Fig.15

Step 5. Remove the 4 screws as Fig.16 to remove the speaker

Fig.17

[url=http://www.hqjdw.com/register.php?fromuser=乖乖狗]

红旗家电维修论坛，游客都可以下载资料[/url]

乖乖狗制作，严禁转载

http://www.hqjdw.com/?fromuid=乖乖狗