User Guide

12
T
he TUNER MODE control allows you to
change the TV’s signal input to either
ANTENNA, CABLE or AUTO mode. It’s
important for the TV to know what type of
signal to look for. (From a Cable TV signal or
a normal Antenna signal.) In the AUTO
mode, when the AUTO PROGRAM feature is
activated, the TV will automatically choose
the correct mode.
1
Press the MENU button on the
remote to show the on-screen menu.
2
Press the CURSOR UP ▲ or DOWN
▼ buttons to scroll through the on-
screen menu until the word INSTALL
is highlighted.
3
Press the CURSOR RIGHT 䊳 but-
ton to display the INSTALL menu
features.
4
Press CURSOR UP ▲ or DOWN ▼
buttons to scroll the Install features
until the words TUNER MODE is
highlighted.
5
Press the CURSOR RIGHT 䊳 but-
ton to select either ANTENNA,
CABLE, or AUTO mode.
6
When finished, press the STATUS
/EXIT button to remove the on-screen
menu from the TV’s screen.
HOW TO
USE THE TUNER MODE CONTROL
When CABLE is selected, channels 1-125
are available.
When ANTENNA is selected, channels 2-
69 are available.
When AUTO is selected, the TV will auto-
matically set itself to the correct mode
based on the type of signal it detects when
the AUTO PROGRAM feature is activated.
HELPFUL HINT
VOL
6
2
4
3
5
1
2
4