Specifications

9
TPS 1.0A LA
4. Mechanical Instructions
4. Mechanical Instructions
Index of this chapter:
4.1 Assy/Panel Removal
4.2 Set Re-assembly
4.1 Assy/Panel Removal
Note:Please put your mechine on a soft material to avoid to
scrape panel when you disassemble it.
Front view
Back view
Step 1. Remove the Base.
Remove the 4 screws as Fig.3.
Fig.2
Fig.1
Step 2. Remove the Back cover and as Fig.4~5.
a.
SHIELD-MAIN
emove the back cover as Fig.4
b. Remove the 5 screws , then remove SHIELD-MAIN as Fig.5.
Remove the 4 screws, then r .
Fig.4
Fig.5
Fig.3
Step 4. Remove the speakers and as Fig.7.the Frame assy
Remove the 13 screws to remove the Frame assy as Fig.7.
b Remove the 8 screws to remove the Speaker as Fig.7.
a.
.
Step 3. Remove the Scaler, Power, IR and Key as Fig.6.
a. Remove the 11 screws and disconnect the 6 cables to remove the
scaler board .
b. Remove the 7 screws and disconnect the 3 cables to remove the
Power board.
c. Remove the 2 screws and disconnect the 1 cable to remove the IR
board.
d. Remove the 2 screws and disconnect the 1 cable to remove the Key
board.
Fig.6