20PFL4101S 20PFL4102S www.philips.
x1 x3 x1 B ! A
Please be aware that when you mount your TV on the wall using the key hole system, the side Audio/Video connectors are difficult to access and use when connecting standard cables.
2 3
Important information Stationary images on the TV screen A characteristic of LCD and Plasma Panels is that displaying the same image for a long time can cause a permanent after-image to remain on the screen. This is called phosphor burn in. Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen. Examples of stationary images (this is not an all inclusive list, you may encounter others in your viewing).
Introduction Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly. Table of Contents Installation Presentation of the LCD Television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Remote control keys . . . . . . . . . . . . . . . . . . .
Presentation of the LCD Television & Television keys: • POWER: to switch the TV on or off. • VOLUME -/+: to adjust sound level. • MENU: to access or close menus. The PROGRAM -/+ keys can be used to select an adjustment and the VOLUME -/+ keys to make that adjustment. • PROGRAM -/+ (- P +): to select programmes. EXT 1 DVI-I In Rear of set : The main connections are made at the bottom of the television. For more details on connections see page 12.
Remote Control Keys for LCD TV Functions 1) . (STANDBY) To set the TV to standby mode.To switch the TV set on again, press P –/+, 0 to 9 or AV keys. 2) Sleeptimer To select the length of time before the set automatically switches to standby (from 0 to 240 minutes) 2) AV To display Source List to select TV or peripheral equipment connected to EXT1, AV/S-VHS, PC or HD (p. 12). 4) 3) 4) ÓŸÅ Teletext keys (p. 9) 5) Unused key. 6) MENU To call up or exit the TV menus. 7) ∏ Screen Format (p.
Remote Control Keys for LCD TV Functions (12 (13 (14 (15 (16 (17 (18 (19 12) ı List of programmes To display / clear the list of programmes. Use the keys <> to select a programme and the key ≥ to display it. 13) ù Sound mode Used to force programmes in Stereo and Nicam Stereo to Mono or, for bilingual programmes, to choose between Dual I or Dual II. The Mono indication is red when in forced position. 14) Q Surround Sound To activate / deactivate the surround sound effect.
Installing your television set 1 Positioning the television set Place your TV on a solid stable surface.To avoid danger do not expose the TV to water,or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear. 2 Connecting the aerials • Insert the aerial plug into the : socket at the rear of the set. • Connect the power lead to the television and the mains plug into the wall socket (220-240V/50 Hz).
Program sort & Press the MENU key.The TV Menu is displayed on the screen. TV Menu Picture Sound Features Install Install Language Country Auto Store Manual Store Sort Name Æ Æ Æ Æ Æ Æ • • • • • • 0 1 2 3 4 5 é With the cursor, select the Install menu followed by the Sort menu. “ Select the programme you want to move using the <> keys and press ≥. ‘ Then use the <> keys to select the new number and validate with ≤. ( Repeat steps “ and ‘ for each program you wish to renumber.
Picture settings & Press MENU then ≥.The Picture menu is displayed: TV Menu Picture Sound Features Install Picture Brightness Colour Contrast Sharpness Colour Temp. Store 39 é Use the <> keys to select a setting and the ≤≥ keys to adjust. “ Once the adjustments have been made, select ≥ to store them. Press Ë to exit. Description of the adjustments: • Brightness: this changes picture brilliance. • Colour: this changes the intensity of the colour.
Screen Formats The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). 4:3 pictures sometimes have a black band at the top and bottom of the screen (letterbox format).This function allows you to optimise the picture display on screen. If your television is equipped with a 4:3 screen. Press the ∏ key (or <>) to select the different modes: 4:3 The picture is reproduced in 4:3 format. Expand 4:3 The picture is enlarged vertically.
Teletext Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.). Press : You will obtain : Teletext call This is used to call or exit teletext mode.The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit page number.
Using in PC monitor mode NOTE – When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is operated under electromagnetic interference environment but will not affect the performance of this product. – For better performance, good quality DVI cable with good noise isolation filter is recommended. • Picture: - Brightness / Contrast : to adjust the brightness and contrast. - Horizontal / Vertical: to adjust the horizontal and vertical placing of the image.
Using in HD (High Definition) Mode (Only available on certain versions) • Colour Temp.: this changes the colour rendering: Cold (bluer), Normal (balanced) or Warm (redder). • Store: to store the picture adjustments and settings. HD Mode The HD (High Definition) mode allows you to enjoy clearer and sharper pictures through the DVI-I inputs if you are using a HD receiver/ equipment that can transmit high definition programming. You must first of all connect the HD equipment (see p.13).
Connecting peripheral equipment The television has 1 external socket situated at the back of the set (EXT1) and sockets on the side. Press the AV key on the remote control to display Source List and select TV or peripheral equipment connected to EXT1, AV/SVHS, PC or HD. The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs. The side connections has audio inputs, CVBS/S-VHS inputs, headphone out.
Side connections Make the connections as shown opposite. With the AV key, select AV/S-VHS. For a mono set, connect the sound signal to the AUDIO L (or AUDIO R) input.The sound automatically comes out of the left and right speakers of the set. Headphones When headphones are connected, the sound on the TV set will be cut.The VOLUME -/+ keys are used to adjust the volume level. The headphone impedance must be between 32 and 600 Ohms.
Tips Poor reception The proximity of mountains or high buildings may be responsible for ghost pictures, echoing or shadows. In this case, try manually adjusting your picture: see Fine Tune (p. 6) or modify the orientation of the outside aerial. If you are using an indoor aerial, reception may be difficult in certain conditions.You can improve reception by rotating the aerial.
© 2006 Koninklijke Philips N.V.
