203V5 www.philips.
Table of Contents 1. Important.................................................1 1.1 Safety precautions and maintenance....1 1.2 Notational Descriptions..............................2 1.3 Disposal of product and packing material.................................................................3 2. Setting up the monitor..........................4 2.1 Installation............................................................4 2.2 Operating the monitor................................5 2.3 Remove Base Stand ....
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important • Temperature: 0-40°C 32-104°F • Humidity: 20-80% RH 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. Important information for Burn-in/Ghost image. • Notes, Cautions and Warnings Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic EquipmentWEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2.1 Installation 2. Attach/slide the base column with the monitor until it clicks into position. Package contents 203V5 Register your product and get support at www.philips.com/welcome Quick Start 3. Hold the monitor base stand with both hands and firmly insert the base stand into the base column.
2. Setting up the monitor Connecting to your PC 203V5LSB/203V5LSU/203V5LSB2/ 203V5LSB26/203V5LSU2 2.2 Operating the monitor Front view product description D-SUB AC IN 3 AC power input VGA input Kensington anti-theft lock or Description of the On Screen Display 203V5LHSB2 What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors.
2. Setting up the monitor The OSD Menu How to adjust OSD with a single key? 1. The key on the bottom of the front bezel provides dual functions to control power on/ off and OSD menu setting. Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. Main menu Power off VGA Input (available for HDMI (available for selective models) selective models) 2.
2. Setting up the monitor Note This monitor accepts a 100mm x 100mm VESACompliant mounting interface. 2.3 Remove Base Stand Remove the Base Stand Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 100mm 1. Place the monitor face down on a smooth surface, taking care to avoid scratching or damaging the screen. 100mm Caution For use only with UL Listed Wall Mount Bracket with minimum weight/load 3.5Kg 2.
3 3. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Response Time (typ.) Optimum Resolution Viewing Angle Display Colors Vertical Refresh Rate Horizontal Frequency sRGB Connectivity Signal Input Input Signal Convenience TFT-LCD W-LED system 19.5" W (49.4cm) 16:9 0.26 mm x 0.26 mm 5ms 1600 x 900 @ 60Hz 90° (H) / 65° (V) @ C/R > 10 16.
3.
3. Technical Specifications 3.1 Resolution & Preset Modes Maximum Resolution 1600 x 900 @ 60 Hz H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35 640 x 480 66.67 37.86 640 x 480 72.81 37.5 640 x 480 75 37.88 800 x 600 60.32 46.88 800 x 600 75 48.36 1024 x 768 60 60.02 1024 x 768 75.03 44.77 1280 x 720 59.86 63.89 1280 x 1024 60.02 79.98 1280 x 1024 75.
4. Power Management 4. Power Management The following setup is used to measure power consumption on this monitor. If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
5. Customer care and warranty black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 5. Customer care and warrant Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. 5.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
5. Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
5. Customer care and warranty 5.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
6. Troubleshooting & FAQs satisfactory, you can do manual adjustments via the OSD menu. 6. Troubleshooting & FAQs Note The Auto Function is not applicable in DVIDigital mode as it is not necessary. 6.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
6. Troubleshooting & FAQs • Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. Image appears blurred, indistinct or too dark • 6.2 General FAQs Adjust the contrast and brightness on On-Screen Display. Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.
6. Troubleshooting & FAQs drivers (.inf and .icm files) or a driver disk when you first install your monitor. Follow the instructions to insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .icm files) will be installed automatically. "warm, with a red-white color tone", while a 9300K temperature yields "cool, bluewhite toning". 2. sRGB; this is a standard setting for ensuring correct exchange of colors between different device (e.g.
6. Troubleshooting & FAQs imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content.
© 2016 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
