202E2 202EL2 www.philips.
Table of Contents 1 1.1 1.2 1.3 Important Safety precautions and maintenance................ 1 Notational Descriptions.......................................... 2 Disposal of product and packing material.... 3 2 2.1 2.2 2.3 Setting up the monitor Installation........................................................................ 4 Operating the monitor............................................ 5 Remove Base Stand and Base.............................. 7 3 3.1 3.2 3.3 3.
• 1. Important • This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor. Do not subject the monitor to severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.
• 1.2 Notational Descriptions IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology.
Recycling Information for Customers There is currently a system of recycling up and running in the European countries, such as The Netherlands, Belgium, Norway, Sweden and Denmark. In Asia Pacific, Taiwan, the products can be taken back by Environment Protection Administration (EPA) to follow the IT product recycling management process, detail can be found in web site www.epa.gov.tw The monitor contains parts that could cause damage to the nature environment.
2. Hold the monitor base stand with both hands and firmly insert the base stand into the base column. 2. Setting up the monitor 2.
2.2 Operating the monitor Connecting to your PC 202E AC power input VGA input DVI-D input(Available for selected models) Kensington anti-thief lock Front view product description Connect to PC 1. 2. 3. 4. 5. : To access the OSD menu. : Return to previous OSD level. : Change to 4:3 display. : To switch monitor's power on and off. : To adjust the OSD menu. : To change the signal input source. : SmartImage Lite.
The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. Description of the On Screen Display What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2.3 Remove Base Stand and Base Resolution notification Remove the Base Stand This monitor is designed for optimal performance at its native resolution, 1600×900@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1600×900@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
Remove the base Note This monitor accepts a 100mm x 100mm VESACompliant mounting interface. Condition: • For VESA standard mounting applications 1. Remove the 4 screw covers.. 100mm 100mm 2. Remove the 4 screws and then remove the base from the monitor.
How to enable SmartImage Lite? 3. Product information 202E 3.1 Smartimage Lite What is it? SmartImage Lite provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage Lite delivers great optimized monitor performance. 1. Press to launch the SmartImage Lite on screen display; 2.
There are three modes to be selected: Standard, Internet, Game. 3.2 SmartContrast What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a LCD monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds. • • • Standard: Enhances text and dampens brightness to increase readability and reduce eye strain.
3.3 Philips SmartControl Lite First launch -Wizard • The first time after installation of SmartControl Lite, it will automatically go to Wizard for first time launch. • The wizard will guide you through adjustment your monitor performance step by step. • You can go to Plug-in menu to launch wizard later on as well. • You can adjust more options without wizard by Standard pane. The new SmartControl Lite software by Phillips allows you to control your monitor via an easy to use on-screen graphic interface.
Start with Standard pane: Adjust menu: • Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. • You can follow the instruction and do the adjustment. • Cancel prompts user if you want to cancel installation.
Color menu: • Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage Lite (Please refer to SmartImage Lite section). • You can follow the instruction and do the adjustment. • Refer to below table for sub-menu item base on your input. • Example for Color Calibration 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4.
First color Calibration Screen: • • • • Previous button is disabled until the second color screen. Next goes to the succeeding target (6-targets). Final next goes File>Presets pane. Cancel closes the UI and returns to the plug in page. • • • SmartImage Lite Allows user to change setting for better display setting based on content. When Entertainment is set, SmartContrast and SmartResponse are enabled.
Options>Input - Will only be active when selecting Input from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. All other SmartControl Lite tabs are not available. • • Options>Audio - Will only be active when selecting Volume from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Display the Source instruction pane and current input source setting.
Help>User Manual - Will only be active when selecting User Manual from the drop-down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Context Sensitive menu The Context Sensitive menu is Enabled by default. If Enable Context Menu has been checked in the Options>Preferences pane, then the menu will be visible. Help>Version - Will only be active when selecting Version from the drop- down Help menu.
Task Tray Menu Enabled The task tray menu can be displayed by rightclicking on the SmartControl Lite icon from the task tray. Left Click will launch the application. Task Tray Menu Disabled When the Task Tray is disabled in the preference folder, only the EXIT selection is available. To completely remove SmartControl Lite from the task tray, disable Run at Startup in Options>Preferences.
3.4 Philips' Flat Panel Monitors Pixel Defect Policy Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control.
Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern.
4 Technical Specifications 202E2/202EL2 Picture/Display LCD panel type Backlight Panel size Aspect ratio Pixel Pitch Brightness SmartContrast Contrast ratio (typ.) Response time (typical) Optimum Resolution Viewing angle Picture Enhancement Display colors Vertical refresh rate Horizontal Frequency sRGB Connectivity Signal input Input Signal Convenience User Convenience OSD Languages Other convenience Plug & Play Compatibility Stand Tilt TFT-LCD CCFL(202E2)/LED(202EL2) 20" W( 50.8 cm) 16:9 0.
Power (202E2) On mode Energy Consumption (EnergyStar 5.0 test method) Normal Operation (typcial) Sleep Off Heat Dissipation* Normal Operation Sleep Off Power (202EL2) On mode Energy Consumption (EnergyStar 5.0 test method) Normal Operation (typcial) Sleep Off Heat Dissipation* Normal Operation Sleep Off Power LED indicator Power Supply 22.37W (typical) AC Input Voltage at 100VAC +/-5VAC, 50Hz +/- 3Hz 19.
Dimension Product with stand (WxHxD) 494x386x199mm Product without stand 494x316x49mm (WxHxD) Box dimension (WxHxD) 565x446x143mm Weight 3.96kg Product with stand Product without stand 3.8kg Product with packaging 5.
4.2 Automatic PowerSaving 4.1 Resolution & Preset Modes Maximum Resolution For 202E2/202EL2 1600 x 900 at 60 Hz (analog input) 1600 x 900 at 60 Hz (digital input) Recommended Resolution For 202E2/202EL2 1600 x 900 at 60 Hz (digital input) H. freq (kHz) 31.47 31.47 35.00 37.86 37.50 37.88 46.88 48.36 60.02 44.77 49.70 63.89 79.98 60.
5 Regulatory Information Electrical Safety • Product fulfills rigorous safety standards Emissions • Low alternating electric and magnetic fields emissions • Low acoustic noise emissions Some of the Environmental features of the TCO Displays 5.
EPEAT (www.epeat.net) “The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process supported by US EPA. EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes.
Federal Communications Commission (FCC) Notice (U.S. Only) • • • • FCC Declaration of Conformity Declaration of Conformity for Products Marked with FCC Logo, This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. EN 55022 Compliance (Czech Republic Only) Commission Federale de la Communication (FCC Declaration) • • • • Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC.
Polish Center for Testing and Certification Notice North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. The equipment should draw power from a socket with an attached protection circuit (a threeprong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.
Ergonomie Hinweis (nur Deutschland) China RoHS Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften. The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and LCD monitor which are produced and sold for China market have to meet China RoHS request.
Your Philips F1rst Choice Warranty 6 Customer care and warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact the Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty.
What is excluded? The Philips F1rst Choice Warranty applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer's name and model and production number of the product. Just a click away In case of any problems, we advise you to read the operating instructions carefully or go to the www.philips.com/support website for additional support.
F1rst Choice Contact Information Country Austria Belgium Denmark Finland Luxembourg The Netherlands Norway Poland Portugal Spain Sweden Switzerland United Kingdom Code +43 +32 +45 +358 +352 +31 +47 +48 +351 +34 +46 +41 +44 Telephone number 0810 000206 078 250851 3525 8761 840 320 041 26 84 30 00 0900 0400 063 2270 8250 0223491505 2 1359 1440 902 888 785 08 632 0016 02 2310 2116 0207 949 0069 32 Tariff €0.07 €0.06 Local call tariff €0.08 Local call tariff €0.
• Your Guarantee in Central and Eastern Europe Dear Customer, Thank you for purchasing this Philips product, which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts during a period of 24 months from date of purchase.
Consumer Information Centers CROATIA Renoprom d.o.o. Ljubljanska 4, Sv.
ROMANIA Blue Ridge Int'l Computers SRL 115, Mihai Eminescu St., Sector 2 RO - 020074 Bucharest Tel: +40 21 2101969 TURKEY Türk Philips Ticaret A.S. Yukari Dudullu Org.San.Bolgesi 2.Cadde No:22 34776-Umraniye/Istanbul Tel: (0800)-261 33 02 SERBIA & MONTENEGRO Kim Tec d.o.o. Viline vode bb, Slobodna zona Beograd L12/3 11000 Belgrade Serbia Tel. +381 11 20 70 684 UKRAINE Comel Shevchenko street 32 UA - 49030 Dnepropetrovsk Tel: +380 562320045 www.csp-comel.
NEW ZEALAND Company: Visual Group Ltd. Address: 28 Walls Rd Penrose Auckland Phone: 0800 657447 Fax: 09 5809607 E-mail: vai.ravindran@visualgroup.co.nz Service Hours: Mon.~Fri. 8:30am~5:30pm Additional service points: 1. Philips Building Jl. Buncit Raya Kav 99. Jakarta Selatan. Phone: 021-7940040, ext 1722/1724, 98249295, 70980942 2. Jl. Tanah Abang 1 no 12S. Jakarta Pusat. Phone: 021-3455150, 34835453 Asia HONG KONG/Macau Company Name: PHK Service Limited Address: Flat A, 10/F.
Singapore Company: Philips Electronics Singapore Pte Ltd (Philips Consumer Care Center) Address: 620A Lorong 1 Toa Payoh, TP4 Building Level 1, Singapore 319762 Tel: (65) 6882 3999 Fax: (65) 62508037 E-mail: consumer.care.sg@philips.com Service hours: Mon.~Fri. 9:00am~6:00pm; Sat. 9:00am~1:00pm MDR Microware Sales Inc. Cebu Branch N. Escario corner Clavano St., Cebu City Phils. # 255-4415/ 255-3242/253-9361/4124864 to 67 Sun # 0922-8210045 to 46 Taiwan Company: FETEC.CO Address: 3F, No.6, Lane 205, Sec.
Israel Company: Eastronics LTD Address: 13 Rozanis St. P.O.B. 39300, Tel Aviv 61392 Israel Tel: 1-800-567000 call free in Israel; (972-508353722 after service hours until 20:00) Fax: 972-3-6458759 E-mail: eastronics@eastronics.co.il Service hours: Sun.~Thurs. 08:00 - 18:00 Your Philips F1rst Choice Warranty(USA) Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation.
WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Attach it to this owner's manual and keep both nearby. a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.
Contact the Philips Customer Care Center phone number listed below for product assistance and procedures for servicing: following details so we can solve your problem quickly. . Philips type number . Philips serial number . Purchase date (copy of purchase may be required) . PC environment Processor: o CUP and Graphic card name and driver version o Operating system o Application being used . Other cards installed Having the following information available will also help speed up the process: .
Your International Guarantee Dear Customer, Please note that the product is not defective under this guarantee in the case where modifications become necessary in order for the product to comply with local or national technical standards which apply in countries for which the product was not originally designed and/or manufactured. Therefore always check whether a product can be used in a specific country.
AUTO button doesn't function • The auto function is applicable only in VGA- Analog mode. If the result is not satisfactory, you can do manual adjustments via the OSD menu. 7 Troubleshooting & FAQs 7.1 Troubleshooting Note The Auto Function is not applicable in DVI-Digital mode as it is not necessary. This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
Horizontal flicker appears • • Green, red, blue, dark, and white dots appears on the screen • The remaining dots are normal characteristic of the liquid crystal used in today’s technology, Please refer the pixel policy for more detail. Adjust the image using the “Auto” function in OSD Main Controls. Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
7.2 SmartControl Lite FAQs Q1. I change the monitor on a PC to a different one and the SmartControl Lite becomes un-usable, what do I do? Ans.: Restart your PC and see if SmartControl Lite can work. Otherwise, you will need to remove and re-install SmartControl Lite to ensure proper driver is installed. Q4. When I click on Product Information, only partial information is shown, what happened? Q2.
Ans.: These are the driver files for your monitor. Follow the instructions in your user manual to install the drivers. Your computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you first install your monitor. Follow the instructions to insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .icm files) will be installed automatically. 7.
Q8: Can I change the color setting of my monitor? system. Please contact your Philips sales representative for more information. Ans.: Yes, you can change your color setting through OSD control as the following procedures, • Press "OK" to show the OSD (On Screen Display) menu • Press "Down Arrow" to select the option "Color" then press "OK" to enter color setting, there are three settings as below. 1.
"burn in", also known as "after-imaging" or "ghost imaging", on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burned in" or "atter-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended.
2010 © Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.
