Register your product and get support at 19PFL3403/77 EN User manual 3
1 Notice 4 2 Important 5 5 6 6 Safety Screen care Environmental care 3 Your TV TV overview Remote control Select your language Automatically install channels Fine tune channels Exclude channels from a list 26 26 26 27 10 Troubleshooting 28 11 Product information 29 7 7 8 4 Get started 10 Position the TV Wall mount the TV Connect the antenna cable To connect the power cord Insert the remote control batteries 10 10 10 11 11 5 Use your TV 13 Switch your TV on/off or to standby Switch
1 Notice 2008 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
• Read this user manual before you start to use this product. Pay close attention to this section and follow the safety and screen care instructions. The product warranty does not apply if damage is caused by failing to follow these instructions. The model and serial number of your TV can be found on the back of the TV as well as on the packaging. • • Safety • • • • • • Two people are required to lift and carry a TV that weighs more than 25 kilos (55lb).
normal over time, it can damage your hearing. To protect your hearing, limit the amount of time you use earphones or headphones at high volume. and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Screen care • • • • Turn off and unplug the mains cord before cleaning the screen. Clean the screen with a soft, dry cloth. Do not use substances such as household cleaning agents as these may damage the screen.
3 Your TV Connectors 2 3 4 5 6 7 Eng lis h 1 Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 10 9 TV overview 8 This section gives you an overview of commonly-used TV controls and functions. Side controls and indicators VOLUME 5 4 b VGA AUDIO Mini-jack connector for PC audio when connecting a PC via DVI-HDMI or VGA. 3 c VGA PC To connect a PC.
S-Video (side) to be used with Audio L/R connectors for camcorder, game console, etc. When you use the S-Video (side) for video signals, do not use the Composite video (side) input for video signals. j Headphones Headphone stereo mini jack. For software update. Remote control 1 2 13 3 c Not used. d SLEEP Sets a delay after which the TV switches to standby. e TIMER Sets the clock and timers. f SMART SOUND Selects pre-defined sound settings. g Navigation keys Navigates through the menus.
Selects a picture format. Eng lis h t CH + / Switches to the next or previous channel. u A/CH Toggles between the current channel and the last viewed channel.
4 Get started This section supplements information in the Quick Start. For information about how to mount and install your TV, refer to the Quick Start. Position the TV Warning • Do not insert the power plug into the wall socket before all the connections are made. • Large screen TVs are heavy. Two people are required to carry and handle a large screen TV. • Before you move the TV, disconnect the cables to Wall mount the TV prevent breakage.
Eng lis h Cable To connect the power cord Warning • Verify that your mains voltage corresponds with the voltage printed at the back of the TV. Do not insert the mains cord if the voltage is different. 1 2 3 Locate the power connector at the back of the TV. The location of the power connector varies according to TV model. Insert the power cord fully into the power connector. Connect the power cord plug to the power outlet. Ensure that the cord is tightly secured at both ends.
Note • Remove the batteries if you are not going to use the remote control for an extended period of time.
5 Use your TV Eng lis h CHANNEL This section helps you perform basic TV operations. Switch your TV on/off or to standby • • Press CH + / - or key in the number on the remote control. Press CHANNEL + / - on the side of the TV. Adjust volume To switch on • If the standby indicator (2) is off, press POWER (1) at the side of the TV. • If the standby indicator (2) is red, press on the remote control. To switch to standby • Press on the remote control. » The standby indicator (2) switches to red.
6 Use more of your TV • • Adjust picture and sound settings Use smart picture settings You can use smart picture instead of the manual picture adjustments to set your TV to a predefined setting. The settings are pre-defined to suit different viewing environments. This section describes how to adjust picture and sound settings. Adjust picture settings 1 2 3 4 Press MENU/BACK and select [Picture]. Press OK. Press or to highlight [Picture]. Press or to adjust the settings.
• Toggle FORMAT on the remote control to access the formats. • • [4:3]: Shows the classic 4:3 format. • [Widescreen]: Stretches the classic 4:3 format to 16:9. Use smart sound settings You can use smart sound instead of the manual sound settings to set your TV to a predefined setting. The settings are pre-defined to suit different listening environments. Adjust sound settings This section describes how to adjust sound settings. 1 2 3 Press MENU/BACK and select [Sound]. Press OK.
Automatically switch the TV to standby (Sleeptimer) Sleeptimer switches the TV to standby after a delay. You can always switch off your TV earlier or reset the sleeptimer during the countdown. 1 3 Press MENU/BACK to return to the previous menu, or press STATUS/EXIT to exit. Toggle SLEEP on the remote control to cycle through the sleep timer settings: off, 15, 30, 45, 60, 90, 120, 180 and 240 minutes. Tip • Press SLEEP once to view the remaining time before the TV switches to standby.
Activate the timer 2 3 Press MENU/BACK and select [Features] > [Timer]. Press and select [Activate] > [On]. Sound Timer Sleep Current Time Activate Start Time Stop Time Source Channel No. : SEL : ADJ Features Install : SEL Off 09:30 On --:---:-TV 2 5 6 7 8 Features Install Off 09:30 On 10:00 11:00 TV 5 : ADJ MENU : EXIT 12 Press MENU/BACK to return to the previous menu, or press STATUS/EXIT to exit.
Create and use your favorite list 1 2 3 4 Press MENU/BACK and select [Install] > [Fav. Channel]. Press or to highlight the favorite channel number. Use the number keys to key in the channel number. » The channel number is displayed beside the favorite list number. Enter up to six favorite channels in the list. FAV FAV FAV FAV FAV FAV Sound Features Fav.
Service Description CC-1 and Dialog and descriptions for the CC-2 action on the captioned TV program show on screen. Usually CC1 is the most used. CC 2 can be used for alternate languages if they are transmitted. Turn on parental control 1 2 3 Use child control and rating locks This section describes how to lock or unlock the TV. You can set a PIN code or use ratings to prevent children from watching certain programs or channels. 3 4 5 6 Press MENU/BACK and select [Features] > [Parental Control].
4 Press to highlight a rating and press OK to select [View] or [Block]. Picture None TV - Y TV - Y7 TV - G TV - PG TV - 14 TV - MA : SEL 5 Sound Features TV Rating All V V V V V V V : ADJ FV Install V S L D V V V V V V V V V V V V MENU : EXIT When you block a rating, all ratings in the younger age categories are automatically blocked. Press MENU/BACK to return to the previous menu, or press STATUS/EXIT to exit.
Access the [Parental Control] menu. Summary of US movie ratings Rating Description Press OK. All Press to highlight a rating and press or to change the setting to [View] or [Block]. NR G All items in the ratings list are locked. Not rated. Movies with a mild content, suitable for all ages. Movies for which parental guidance is recommended. They may contain a few racy or violent scenes or maybe some bad language. Movies for which parental guidance may be recommended if under age 13. Restricted.
Unlock blocked channels or programs To view programs or channels blocked with the parental control blocking options, unlock them with the password or turn off parental control. Turn off parental control 1 2 Access the [Parental Control] menu. Press to highlight [Parental Control] and press or to turn off [Parental Control].
For information about how to connect a PC to the TV, see the Quick Start. If necessary, adjust the picture position to the center of the screen with the cursor buttons. Adjust display settings for PC mode Adjust your TV display settings in PC mode. 1 Caution • Before you connect your PC, set the PC monitor refresh rate to 60Hz. 2 Press MENU/BACK and select [Features] > [Geometry]. Press OK. Picture Configure your TV in PC mode 1 : SEL Tip • Toggle TV/PC to switch to PC and the last accessed mode.
8 Use your TV in HDTV mode Note • Certain picture and sound features are not available in HDMI and YCbCr modes. Not all models can be configured in high definition (HD) mode. For information about your set, see the specification. When you connect an HD device to your TV, configure the display format of your TV. You might also have to configure the display format of your HD device. For information about configuring your device, see the documentation of the device.
4 5 Press or to adjust the setting. Eng lis h Press MENU/BACK to return to the previous menu, or press STATUS/EXIT to exit. The following display settings can be configured when an HD device is connected to the TV. • [Horizontal Shift] and [Vertical Shift]: Adjusts the horizontal and vertical position of the picture.
9 Install channels Picture Tuner Mode System Auto Program Fine Tune The first time you setup your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to reinstall and fine-tune channels. : SEL Select your language a Press MENU/BACK and select [Install] > [Language]. Picture Sound Features Ch. Setup Language Ch. Setup List Fav.
3 Press MENU/BACK and select [Install] > [Ch. Setup] > [Fine Tune]. Press or setting. Picture Sound Features Ch. Setup Tuner Mode System Auto Program Fine Tune : SEL 4 Picture to adjust the frequency Install Antenna Auto > 195.30Mhz : ADJ Sound List Current Channel In List : SEL 5 : ADJ Features Install Eng lis h 2 30 Off MENU : EXIT Press MENU/BACK to return to the previous menu, or press STATUS/EXIT to exit.
10 Troubleshooting This section describes commonly-encountered issues and accompanying solutions. Some problems you encounter with your TV can be corrected by consulting the following list: No picture, no sound 1 2 3 4 Check if the fuse or circuit breaker works. Plug another electrical device into the outlet to make sure it works or is turned on. Power plug is in a bad contact with the outlet. Check the signal source. No color 1 2 3 Change the color system. Adjust the saturation. Try another program.
Connections (Rear) • • Note • Product information is subject to change without prior notice.
• Width: 47.3 cm (19PFL3403), 67.1 cm (26PFL3403) • Depth: 6.9 cm (19PFL3403), 9.0 cm (26PFL3403) • TV dimensions with stand: • Height: 39.4 cm (19PFL3403), 50.3 cm (26PFL3403) • Width: 47.3 cm (19PFL3403), 67.1 cm (26PFL3403) • Depth: 16.0 cm (19PFL3403), 21.5 cm (26PFL3403) This information is correct at the time of press. For updated contact information, refer to www. philips.com/support.
© 2008 Koninklijke Philips Electronics N.V. All rights reserved.
