Register your product and get support at www.philips.
6 1 Notice 2 2 Important 4 Your TV 7 7 7 8 3 TV controls Remote control Remote control usage 4 Use your TV Switch your TV on Switch your TV to standby Switch your TV off Switch channels Watch connected devices Adjust TV volume Use teletext 5 Use more of your TV Access TV menus Change picture and sound settings Use the universal access menu Use advanced teletext features Create and use lists of favourite channels Use the Electronic Programme Guide Display the TV clock Use timers Lock unsuitable
1 Notice 2011 © Koninklijke Philips Electronics N.V. All rights reserved. [*X;\X>Y;J]Z ><* ZW *XY YJ X,>]~* ;Y,JWY notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
Engl i s h Copyright Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world. Manufactured under licence from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories. Y,* }J~J >]Q ;~,*\];Y;J] Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries.
2 Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety ? & & & Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
Screen care Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage. Unplug the TV before cleaning. Clean the TV and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV.
Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.
Remote control Engl i s h 3 Your TV Congratulations on your purchase, and *}XJ?* YJ D,;};[Z J {W}} *]*\Y {
f SOURCE Select connected devices. g (Mute) Mute or restore audio. h +/- (Volume) Adjust volume. Remote control usage When you use the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects. i 0-9 (Numeric buttons) Select channels. j SUBTITLE Enable or disable subtitles. k TEXT Enable or disable teletext.
Switch your TV to standby This section helps you perform basic TV operations. Press (Standby-On) on the remote control again. » The remote control sensor on the TV switches to red. Switch your TV on Press the power switch on the TV. » There is a short delay before the TV responds. Switch your TV off Press the power switch on the TV again. » The remote control sensor on the TV switches off. » Though the TV consumes very little power when in standby, energy continues to be consumed.
Switch channels Press CH+ or CH- on the remote control. View channel preview You can view a preview of all available channels with the channel grid. Press FIND. » The channel grid appears. » To preview a channel, select it. » To watch a channel, select it, then press OK. Watch connected devices Press CH +/- on the TV. Note Before you select a device as a source, switch the device on.
Press +/- on the remote control. Press Use teletext 1 +/- on the TV. Engl i s h Adjust TV volume Press TEXT. » The main index page appears. 2 Select a page with one of the following: Press the Numeric buttons to enter a page number. Press or to view the next or previous page. Press the Colour buttons to select a colour coded item. Press (BACK) to return to a previously viewed page. 3 Press TEXT to exit teletext.
5 Use more of your TV Access TV menus Menus help you to install channels, change picture and sound settings and access other features. 1 Change picture and sound settings Change picture and sound settings to suit JW< [<*{*<*]X*Z| JW X>] >[[} [<*Q*\]*Q settings or change settings manually. Note While you watch TV or external devices, press ADJUST, then select [Smart picture] or [Smart sound] for quick access to picture and sound settings. Press . The menu screen appears.
3 Press . Select [Setup] > [TV settings] > [Picture], then press OK. Select one of the following settings, then press OK. [Smart picture] XX*ZZ [<*Q*\]*Q Z?>
[Movie expand 16:9]: (Not for HD and PC mode.) Scale 4:3 format to 16:9. [Wide screen]: Scale 4:3 format to 16:9. Change picture format 1 2 3 Press ADJUST. Select [Picture format], then press OK. Select a picture format, then press OK. Summary of picture formats [Unscaled]: For HD and PC mode only, and in selected models only. Allow maximum sharpness. Some distortion may be present due to the broadcaster’s systems. Set your PC resolution to wide screen mode for best results.
1 2 3 Press . Select [Setup] > [TV settings] > [Sound], then press OK. » The [Sound] menu appears. Select one of the following settings, then press OK. [Smart sound] sound settings. [Reset]: Reset to factory default settings. [Clear sound]: Enhance the sound clarity. [Bass]: Adjust the bass level. [Treble]: Adjust the treble level. [Surround]: Switch on spatial sound. [Incredible Surround]: (For selected models) Enhanced spatial sound for increased surround effect.
Use advanced teletext features Access the teletext options menu Access the teletext features through the teletext options menu. 1 Press TEXT. » The teletext screen appears. 2 Press OPTIONS. » The teletext options menu appears. 3 Select one of the following options, then press OK. [Freeze page] / [Unfreeze page]: Freeze/unfreeze the current page. [Dual screen] / [Full screen]: Switch between full screen and dual screen teletext. [T.O.P.
You can exit the favourites list, and view all installed channels. 1 While you watch TV, press FIND. » The channel matrix menu is displayed. 2 3 Press OPTIONS. Select [Select list] > [All], then press OK. » All channels are displayed in the channel grid. Note All favourite channels are marked by an asterisk when you view the channel grid. Use the Electronic Programme Guide The programme guide is an on-screen guide available for digital channels.
[Search by genre]: Search TV programmes by genre. [Scheduled reminders]: List programme reminders. Only available for upcoming programmes. [Acquire EPG data]: Update the latest programme guide information. Display the TV clock 1 While you watch TV, press OPTIONS. » The options menu is displayed. 2 3 Select [Clock]. Press OK. Note Display the TV clock To disable the clock, repeat the procedure. You can display a clock on the TV screen.
Lock unsuitable content You can set timers to switch the TV to ZY>]Q >Y > Z[*X;\*Q Y;?*| You can prevent your children from watching certain programmes or channels by locking the TV controls. Tip Set the TV clock before you use timers. Automatically switch the TV to standby (sleep timer) Sleep timer switches the TV to standby after a [<*Q*\]*Q QW<>Y;J]| Tip You can switch off your TV earlier or reset the sleep timer during the countdown.
Lock or unlock one or more channels 1 Press > [Setup] > [Channel settings] > [Child lock] > [Channel lock]. » A list of channels is displayed. 2 Select the channel that you want to lock or unlock, then press OK. » ,* \ channel, you are prompted to enter your PIN code. 3 Enter your code and press OK. » If the channel is locked, a lock icon is displayed. 4 Repeat the process to lock or unlock more channels. 5 To activate the locks, switch the TV on and off.
1 2 While you watch TV, press SUBTITLE. Select one of the following, then press OK. [Subtitles on]: Always display subtitles. [Subtitles off]: Never display subtitles. [On during mute]: When audio is muted, display subtitles. Note Repeat this procedure to enable subtitles on each analogue channel. Select [Subtitles] > [Subtitles off] to disable subtitles.
Change slide show settings Change music settings 1 While you view a slide show, press OPTIONS. » The slide show options menu is displayed. 2 Select one of the following, then press OK. [Start/Stop slideshow]: Start or stop slideshow. [Slideshow transitions]: Set the transition from one picture to the next. [Slideshow frequency]: Select the display time for each photo. [Repeat] / [Play once]: View the pictures in the folder once only, or repeatedly.
Listen to digital radio channels 4 5 1 Press FIND. » The channel matrix menu is displayed. Step 2: Download and update the latest software version 2 Press OPTIONS, then select [Select list] > [Radio]. » The radio channel grid appears. 1 2 3 4 3 Select a radio channel and press OK to listen. A: with a USB storage device, To update with a USB storage device, you need: A computer with Internet access A USB storage device.
4 If you do not want to update the software, select [Setup] > [Software settings] > [Clear announcement], then press OK. Note If you skip the update, you can update it manually later (see ‘C: Check for updates through digital broadcasts’ on page 24). C: Check for updates through digital broadcasts [Auto switch off]: To conserve energy, set the TV to switch off automatically after a period of inactivity.
,* \<* prompted to select a menu language and to install TV and digital radio channels (if available). Afterwards, you can re-install and \]* YW]* X,>]]*}Z| Automatically install channels You can search and store channels automatically. Step 1: Select your menu language 1 2 3 Press . Update the channel list You can enable automatic update of channels when your TV is in standby mode.
Step 2: Search and store new TV channels Rename channels 1 2 You can rename channels. The name appears when you select the channel. 3 Press . Select [Setup] > [Channel settings] > [Channel installation] > [Analogue: Manual antenna installation] > [Find channel], then press OK. If you know the three-digit frequency of the channel, enter it. To search, select [Search], then press OK. When the channel is found, select [Done], then press OK.
Engl i s h Test digital reception You can check the quality and signal strength of digital channels. This allows you to reposition and test your antenna or satellite dish. 1 2 Press 3 Enter the frequency to test, then press OK. 4 5 . Select [Setup] > [Channel settings] > [Channel installation] > [Digital: Reception test] , then press OK. Select [Search], then press OK. When the channel is found, select [Store], then press OK.
Professional Mode instruction Professional Setup Remote control (22AV8573, optional) __________________________ Introduction Included in this TV is a special functional mode that allows the TV to be configured for ‘limited user access ‘. This feature is called ‘Prison mode’. This section has been designed to help install and operate this TV in Prison mode. Before reading this section, please also read the sections to set the basic functionality of this TV.
Engl i s h Prison mode options This paragraph describes the functionality of each item in the Prison mode setup menu. Enter the next layer by pressing [OK], or [>]. Return to a previous level by pressing [<]. Navigate in the current layer by pressing [^], or [v].
8 Connect devices This section describes how to connect devices with different connectors. For the location of these connectors on your TV, see the quick start guide. More examples of connections with other devices are provided in the Quick Start Guide. b EXT 1 (RGB and CVBS) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. Note You can use different types of connectors to connect a device to your TV.
g EXT 2 (Y Pb Pr and AUDIO L/R) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. Engl i s h e PC IN (VGA and AUDIO IN) Audio and video input from a computer. VGA VGA AUDIO IN LEFT/RIGHT VGA/DVI f HDMI 1 Digital audio and video input from highQ*\];Y;J] Q;~;Y>} Q*;X*Z ZWX, >Z ¡}W<> players. h (Headphone) Stereo audio output to headphones or earphones.
Side connections Connect a computer a USB Data input from USB storage devices. Before you connect a computer to the TV Set the screen refresh rate on your computer to 60Hz. Select a supported screen resolution on your computer. Connect a computer with one of the following connectors: Note b COMMON INTERFACE Slot for a Conditional Access Module (CAM). Connections via DVI or VGA require an additional audio cable.
HDMI cable and HDMI-DVI adaptor Use a Conditional Access Module AUDIO IN LEFT/RIGHT VGA/DVI Engl i s h A Conditional Access Module (CAM) is provided by digital TV service operators to decode digital TV channels. Note DVI Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module. VGA cable Insert and activate a CAM AUDIO IN LEFT/RIGHT VGA/DVI Caution Be sure to follow the instructions described below.
Access CAM services 1 2 3 Insert and activate the CAM (see ‘Insert and activate a CAM’ on page 31). Press OPTIONS. Switch on or off EasyLink When you play an HDMI-CEC compliant device, the TV switches on from standby, and switches to the correct source. Select [Common interface]. » Applications provided by the digital TV service operator are displayed. Note This menu option is available only if the CAM is inserted and activated correctly.
[EasyLink]: Stream TV audio through the connected HDMI-CEC device. Switch the TV audio to the connected HDMI-CEC audio device through the adjust menu. [EasyLink autostart]: Turn off TV speakers automatically and streams TV audio to the connected HDMICEC audio device. Note To mute the TV speakers, select [TV speakers] > [Off].
9 Product information Multimedia Supported storage device: USB (only NTFS, FAT or FAT 32 USB storage devices are supported) W[[J \}* {JYZ Images: JPEG Audio: MP3 Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
Engli sh Supported TV mounts To mount the TV, purchase a Philips TV mount or a compatible TV mount. Warning Follow all instructions provided with the TV mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper TV mounting that results in accident, injury or damage. Before you mount, perform these steps: 1 2 3 To prevent damage to cables and connectors, leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV.
10 Troubleshooting This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. Check that the power cable is securely connected. The remote control is not working properly: Check that the remote control batteries are correctly inserted according to the +/- orientation.
Sound issues There is a picture but sound quality is poor: Note HDMI connection issues There are problems with HDMI devices: Note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from a HDMI device. If the TV does not recognise the HDMI device and no picture is displayed, try switching the source from one device to another and back again.
11 Index D A age rating analogue channels \]*YW]* language, change audio language 20 20 #$ 20 20 demo devices watch digital channels digital radio language, change subtitles dimensions 24 10 23 20 21 37 E C CAM enable Insert care channels channel list favourites hide or unhide install (automatic) install (manual) rearrange rename reorder switch update ¡ &5 ¢ child lock clock common interface computer, see PC Conditional Access Module connect connect device connect, PC connect
language audio menu subtitles location, home or shop S 20 20 21 24 M multimedia 8 mute TV speakers 21 21 34 P PC, display resolutions picture format picture settings Pixel Plus link position the TV power Professional Mode Instruction 36 14 13 35 24 36 28 12 R recycle reinstall TV remote control overview rename channels reorder channels 6 25 7 26 26 screen care settings picture sound shop mode sleeptimer smart picture smart sound software digital broadcast update version sound setti
Information about how to re-tune your TV during the digital TV switchover. Television in the UK is going digital, bringing us all more choice and new services. Starting in late 2007 and ending in 2012, television services in the UK will go completely digital, TV region by TV region. Please see the next page to find out when your area switches to digital. Digital UK is the independent, non-profit organisation leading the process of digital TV switchover in the UK.
If you have any questions, please contact your equipment supplier or call Digital UK on … 0845 6 50 50 50 or visit www.digitaluk.co.uk How to re-tune: 1. Press h on the remote control. 2. Select Setup and press OK. 3. Select Search for channels and press OK. 4. Select Reinstall channels and press OK. 5. Select your country (UK) and press OK. 6. Select Antenna DVB-T and press OK. 7. Select Start and press OK. The installation can take several minutes.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved.
