User manual

size:H85 x W60mm

LED Adapter

EN Installation guide

中文安装指导

Lumileds is the warrantor of this product.

The Philips trademarks are used under license

from Koninklijke Philips N.V. (2017).

HIR2,HB3/4, Fog,

H11, H7 and H4

LED Adapter

PAGE 1
size:H85 x W60mm LED Adapter LED Adapter HIR2,HB3/4, Fog, H11, H7 and H4 Lumileds is the warrantor of this product. The Philips trademarks are used under license from Koninklijke Philips N.V. (2017). © Lumileds Holding B.V. 2017.
PAGE 2
Installation guide H4 • Plug LED adapter into car lamp socket and LED lamp header. • Fix LED adapter body to the metal frame of engine room with belt. • Please make sure to keep the seal after installation. Installation H4 HB3/4 & HIR2 H11 & Fog H7 HB3/4 & HIR2, H11 & Fog and H7 installation same as H4 Caution • The LED Adapter gets hot on the working condition, please do not touch until it fully cool down.
PAGE 3
安装指导 H4 HB3/4 & HIR2 H11 & Fog H7 • 将LED解码器分别与汽车车灯接口和LED灯接口连接； • 将LED解码器本体固定在引擎仓的内部金属框架上； • 安装后，请保持原来的密封环境。 HB3/4 & HIR2, H11 & Fog 和 H7 安装方式与 H4相同 H4 安装注意 • LED解码器在工作中会发热，在冷却前请勿触摸； • LED解码器必须固定在引擎仓金属框架上，严禁固定于线束，管道，塑料或发热物体表面。连接电源连接电源连接车灯连接车灯 4 5