User Guide

7
Picture, Sound and Features menus
& Press the H key, with the cursor select Picture, Sound or Features, then validate with ¬.
é Use the
îÏ keys to select a setting and the Ȭ keys to adjust.
“ To quit the menus, press
d.
• Brightness: this changes picture brilliance.
• Colour: this changes the intensity of the colour.
• Contrast: this changes the difference between the
light and dark tones.
•
Sharpness: this changes the picture definition.
• Colour Temp.: this changes the colour rendering:
Cold (bluer), Normal (balanced)
or
Warm (redder).
• Store: to store the picture adjustments and
settings.
• Equalizer:to adjust the sound tone (from bass:
120 Hz to treble: 10 kHz).
•
Balance: this balances the sound on the left and
right speakers.
• Delta Volume: this is used to compensate any
volume discrepancies between the different
programs or EXT sockets.This setting is available
for programs 0 to 40 and the EXT sockets.
• AVL (Automatic Volume Leveller): this is used to
limit increases in sound, especially on program
change or advertising slots.
• Dolby Virtual:To activate / deactivate the
surround sound effect.You can also access these
settings with key
t.
• Store: this is used to store the sound settings.
Sound menu
Picture menu
Features menu
•
Timer (only available on certain versions): This
menu lets you use the TV set as an alarm.
& Sleep: to select an automatic standby
period.
é Time: enter the current time.
Note:
the time is updated automatically each
time the TV set is switched on via the teletext
information on programme 1. If this program
does not have teletext, the update will not take
place.
“ Start Time: enter the start time.
‘ Stop Time: enter the standby time.
( Program No.: enter the number of the
programme for the wake-up alarm.You can
select an FM station by using the
Ȭ
keys (the 09 keys are only used to select
TV programs).
§ Activate: the settings include:
• Once for a single alarm,
• Daily for each day,
• Stop to cancel.
è Press b to put the TV set in standby. It will
automatically come on at the time
programmed. If you leave the TV set on, it will
just change programmes at the time entered
(and will go to standby mode at the Stop
Time).
• Contrast +: automatic adjustment of the
picture contrast which permanently sets the
darkest part of the picture to black.
• Sleep (only available on certain versions): to
select an automatic standby period.
TV Menu
Picture
Sound
Features
Install
Mode
Sound
Equalizer Æ •
Balance Æ •
Delta Volume Æ •
AVL Æ •
Dolby Virtual Æ •
Store Æ •
120 Hz
500 Hz
1500 Hz
5 KHz
10 KHz
TV Menu
Picture
Sound
Features
Install
Mode
Features
Timer
Contrast +
Sleep
On
TV Menu
Picture
Sound
Features
Install
Mode
Picture
Brightness
Colour
Contrast
Sharpness
Colour Temp.
Store
39