Operation Manual

Depart. Technical support- CM640 PROCEDURE COMPANY RESTRICTED

PHILIPS Consumer

Communications

Centre du Mans

Service Repair Support

VY-V-640-P162

Page : 6 of 38

Langue : EN

Date : 08/02/05

The purpose of the radio test is to prove that the tested phone is compliant to the Standard.

The radio test must be performed with a

Digital Radio Test Set. The mobile has to

be set on the antenna coupler inside the

shielded chamber.

Due to a not accessible RF connector when the Product is closed, it will be necessary to make

radio test inside Shielded chamber only.

Optimal reception point

s an example, the ideal

positioning for Philips 162 is

illustrated on the right

The fixture (on the right picture)

has been used to achieve all the

measurements mentioned

hereafter in the tables.

See Help Radio Files Over the antenna - RF Calibration.pdf & Over the antenna - The

equipments.pdf under the Internet Web Site :

http://philipscscc.soft2you.net/ in " Technical Support \ Component List \ Wireless \ PHILIPS 162

" section

Use the Test SIM Card « SP »to test the GSM 900 / DCS 1800 band

7.0 BEFORE STARTING

or in part is prohibited without the written