Technical data

7
Installation
Magnavox LCD TV
Go to cover page
Cable Box with Audio/Video Out Jacks
This connection will supply
Stereo sound to theLCD TV.
1.
Connect the Cable TV signal to the
IN jack (or RF IN or CABLE IN)
on the Cable Box.
2. Using an RCA-type video cable (not
supplied) connect one end of
the Videocable to the Video Out jack of the Cable
Box.
Connect the
other end of the cable tothe yellow VIDEO jack on the side of theTV.
Video cablesare usually marked withyellow and are available from
Magnavox orelectronics retailers. Video jacks on most
equi
pment
are yellow.
3. Using RCA-type, stereo audio cables (not
supplied), connect one
end of the cablesto the left and right Audio Out jacks of the
Cable Box.
Connect the other end of thatcable to the Audio jack on the side of the
LCD TV. Audio cables are usually markedwith red and white and are
available fromMagnavox or electronics retailers
.The right
audio jack is
red and the left audio jack is
white. Match the cable colors to the jack
colors.
4. Plug the DC adapter into the DC IN 16V jack on the LCD
TV.
Plug the power cableinto an outlet.
AUDIO/VIDEO INPUT CONNECTIONS
The AUDIO and VIDEO In jacks on the rear of the LCD TV enable
quick connections of other equipment. Connect a VCR, DVD
Player, Video Game, Camcorder,etc., to these jacks. To view the
materialplaying on the other equipment,
Set the LCD
TV to its AV
Mode.
1. Connect a RCA-style video cable(usually yellowor marked
CVBS) To the VIDEO OUT jacks of the other
equipment (DVD
Player, Camcorder,etc.) and to the yellow VIDEO jack on the side
of the LCD TV.
2. Connect RCA-style audio cables (usuallyred and white) to the
AUDIO OUT (leftand right) jacks on the other equipment.
Connect
the other end of the cables to
the AUDIO jack on the side of the
LCD TV.
3.Plug the DC Adapter into the DC IN
16V jack on the TV. Plug the
power cable into an outlet. Turn on the TV and otherequipment.
4.Press the Source button to set the
TV to AV Mode.
5.Press PLAY on the other equipment to view its material on the TV.
The S-Video connection on the rear of the
LCD TV can provide you with better LCD
picture detail and clarity for
the playbackof accessory sources such as DBS (digital
broadcast
satellite), DVD (digital video
discs), video games, and VHS VCR
(videocasse
tte recorder) tapes than the normal
antenna picture
connections.
Note: The accessory device must have an
S-VIDEO OUT (put) jack
in order for you to complete the connection
on this page.
1. Connect an S-Video cable to the S
-
VIDEO
jack of the other
equipment(DVD Player,Camcorder, etc.) and to the S
-
VIDEO jack
on the rear of the LCD TV.
2. Connect RCA-style audio cables (usually
red and white) to the AUDIO OUT (left and right) jacks on the other
equipment.Connect the other end of the cables to the
AUDIO
jack on the side of the LCD TV.
3.Plug the DC Adapter into the DC IN 16V
jack on the LCD TV.
Plug the power cableinto an outlet. Turn on the LCD TV and
other equipment.
4.Press the Source button to setthe LCD TV to its S-VIDEO mode.
5.Press PLAY on the other equipment toview its material on the
LCD TV.