Technical data

7
150MT10P LMT
TV OSD Menus
Go to cover page
Using other menus (With remote controller)
Automatic tuning
Manual tuning
Choosing a language and country
This menu allows you to automatically search for all
the programmes available in your region (or on your
cable network).
This menu allows you to store the programmes one by one.
1.Press MENU.
2.Select INSTALL ( ), then press . The INSTALL menu appears.
3.Select MANUAL STORE ( ) then press . The menu appears:
4.Press to go to the SYSTEM menu. Use to choose
EUROPE (automatic detection*) or manual detection with WEST
EUR (standard BG reception), EAST EUR (standard DK
Reception), UK (standard I reception) or France (standards LL').
Then press to exit from the menu.
5.Select SEARCH and press .
The search begins. As soon as a programme is found, the search
will stop. If you know the frequency of the programme required,
enter its number directly using the 0, 9 keys and go to step 7.
6.If reception is un-satisfactory, select FINE TUNE and hold down
or key.
7.Select PROG. NO (programme number) and use the or 0
to 9 keys to enter the desired number.
8.Select STORE and press . The message STORED appears.
The programme is stored.
9.Repeat steps 5 to 8 for each programme to be stored.
To exit: press the key.
* Except for France (standard LL'): select the option FRANCE.
1.First carry out operations 1 to 8 above, then:
2.Press once to select AUTO STORE then press . The
search begins. After several minutes, the INSTALL menu
Reappears Automatically.
3.If the transmitter or the cable network broadcasts
the automatic sort signal, the programmes will be
correctly numbered.
4.If not, the programmes found will be numbered in descending
order starting at 99, 98, 97, etc.
Use the SORT menu to renumber them. Some transmitters or
cable networks broadcast their own sort parameters (region,
languages, etc.). Where this is the case, make your choice using
the keys And confirm with .To exit or interrupt the
search, press the MENU key.
5.To exit from the menus, press .
1.Press the MENU key to display the main menu.
2.Select INSTALL , then press . The INSTALL menu
appears. The LANGUAGE option is activated.
3.Press to go into the LANGUAGE menu.
4.Select your language with the keys.
The menus will appear in the chosen language.
5.Press to exit the LANGUAGE menu.
6.Select the option COUNTRY and press .
7.Select your country with keys.
8.Press to exit the COUNTRY menu.
9. To exit from the menus, press .
If your country does not appear in the list, select OTHER.