Technical data

TV control

Use your remote controlier

150MT10P LMT

Go to cover page

1 PIP Shift

2 PIP On/Off, Size

3 AV source

4 Smart sound controlsTo access a series of settings: VOICE,

MUSIC, THEATRE and return to PERSONAL

5 Menu To display or exit from the menus

6 Cursor These 4 keys are used to move within the menus

7 Volume To adjust the sound level

8 Mute To disable or enable the sound

9 Teletext features

10 Sound mode To switch from STEREO to MONO or to choose

between Dual I and Dual II for bilingual transmissions.For TV

sets fitted with NICAM reception, depending on the

transmission, you can switch from CAMSTEREO to MONO or

choose between NICAM DUAL I, NICAM DUAL II and MONO.

When the sound mode is switched to MONO, the indication is

displayed in red.

11 Previous programme To access the previously viewed

programme.12Screen informationTo display/remove the

programme number, the name (if it exists), the time, the sound

mode and the time remaining on the timer. Hold down for 5

seconds to permanently display the programme number on the

screen.The volume level and the smart control adjustments are

then displayed each time they are used.

13 Selecting TV programmesTo move up or down a programme.

The number, (the name) and the sound mode are displayed for a

few seconds.For some TV programmes the title of the

programme appears at the bottom of the screen.

14 PC/TV mode selection

15 Smart picture controls To access a series of settings: RICH,

NATURAL, SOFT, MULTIMEDIA and return to PERSONAL.

16 Numerical keys For direct access to programmes. For a 2 digit

programme number, the 2nd digit must be entered before the

dash disappears.

17 Program List

18 Standby To set the TV to standby mode. To switch the TV set

on again, press -, +, or any digit between 0 and 9.

19 Sleep timer To select the length of time before the set

automatically switches to standby (from 0 to 240 minutes)