Technical data

28
150MT10P LMT
Go to cover page
Contrast adjustment (Sub-Contrast). Use this menu item to
adjust the contrast gain of pre-amp ranges from 0 to 255.
GAIN R G B
COLORRGB
Color temperature gain adjustment. Use these menu items to
adjust the RGB gains of pre-amp for different color
temperatures, ranges from 0 to 255.
OFFSET R G B
Sub-Brightness adjustment. Use this menu item to adjust
the brightness level (DC-level) of pre-amp range from 0 to
255.
Factory Adjustment
PRESET VIDEO RESOLUTION
Use or buttons to select SUB-CON, COLOR ,R G B,..etc.
Use or buttons to decrease/increase the value of each item
: adjust Sub-brightness & Sub-contrast automatically.
A UT O
Factory Mode Adjustment
OK
OK
Entering Factory Adjustment Menu
Push & buttons then power on the monitor, release them
after picture display normally. Press button to bring up OSD
menu of factory mode as shown below.
Use button to select factory adjustment indication (for example:
LCD TV V1.28 20011030, which is the entrance of the factory
adjustment menu, press button to access it. The window
shows as below.
OK
(PS: The OffsetRGB function can be used on reduce or eliminate
snowy noise on the background when the resolution of video signal is
1024 X 768 vertical 60Hz. Slightly increase or decrease the value
until snowy noise completely disappear.)
OFFSET R G B
OFFSET R G B
GAIN R G B
GAIN R G B
GAIN R G B
GAIN R G B
COLOR R G B
COLOR R G B
SUB CON
SUB CON
-
AUTO SUB
AUTO SUB
ORIGINAL PANEL COLOR
-
EXTERNAL RAM
T V
EXIT
T V SHIFT HV
OK
FACTORY ADJUST MENU
OFFSET R G B
GAIN R G B
GAIN R G B
GAIN R G B
COLOR R G B
COLOR R G B
SUB CON
SUB CON
-
AUTO SUB
AUTO SUB
ORIGINAL PANEL COLOR
-
EXTERNAL RAM
T V
EXIT
T V SHIFT HV
OK
FACTORY ADJUST MENU
LCD TV V1.28 20011030