Technical data

15
150MT10P LMT
CLOCK & PHASE Adjustments
Fig. 2
Go to cover page
Front control panel
ATTENTION
OSD MAIN MENU LOCKED
ATTENTION
OSD MAIN MENU UNLOCK
ATTENTION
ATTENTION SIGNAL OFF
ATTENTION
ATTENTION SIGNAL ON
SERVICE MODE
SERIAL NO.: TY 123456
HOURS OF OPERATION: 000103
In the factory mode, once video signal removed, a full white pattern
will be display on the screen as Fig.1 in stead of power saving mode.
In other words, the power saving function will be disable in the factory
mode.
NO VIDEO INPUT
AGING...
To Lock/Unlock OSD function
The OSD function can be locked by pressing button for more
than 10 seconds, the screen shows following windows for 3 seconds.
Everytime when you press Or button, this message
Appears On the screen automatically. The & (CHANNEL) ,
& (VOLUME) hotkey are still functional for CHANNEL and
VOLUME expectively while OSD locked
OK
OK AUTO
Locked OSD function can be released by pressing button for
more than 10 seconds. While press button for OSD unlocked
purpose, the screen will keep showing OSD MAIN MENU LOCKED
until OSD function unlocked and screen automatically shows
following window for 3 seconds.
OK
OK
Switch ON/OFF attention signals
All attention signals can be switched off by keep pressing
button for more than 10 seconds if there is no video signal supplied.
AUTO
Recover attention signals by pressing button for more than
10 seconds without video signal input.
AUTO
Access Service Mode
Operating monitor with no signals (power saving mode), keep
pressing button for more than 10 seconds. Following
information will appear on the screen. Leave service mode by either
re-feed video signal or simply turn off and on the power of monitor.
OK
Access Factory Mode
To hold And buttons then power on the monitor. Press
to bring up OSD menu for confirmation as below:
OK AUTO
OK
Fig.1
LCD TV V1.28 20011030
LCD TV V1.28 20011030