User Guide

2
The television set has 4 keys which are located on the front or the top
of the set depending on the model.
The VOLUME - + (-a+) keys are used to adjust the sound level.
The PROGRAM - + (- P +) keys are used to select the required
programmes.
To access the menus, hold down the VOLUME - and VOLUME + keys
simultaneously.Then use the PROGRAM - + keys to select an adjustment
and the VOLUME - + keys to make the adjustment.
To exit from the menu, hold down the VOLUME - and VOLUME + keys
for a few seconds.
Note: when the LOCK function is activated, these keys are unavailable (see
page 6).
The keys on the TV set
The keys on the remote control
Standby
To set the TV to standby mode.
The red indicator lights up.To
switch the set back on, press P
, P or to .
Select Programme
Brings up the previous or
following programme.
Numerical Keys
For direct access to programmes
For a 2-digit programme number,
the second digit must be entered
before the dash disappears.
To view a programme which has been
locked, you must enter the confidential
code number (see p. 6).
Screen Information
Hold down for 5 seconds to
permanently display the
programme number. Press quickly
to display or remove the
programme number and the time.
Volume
To adjust the sound level.
Mute
To disable or enable the sound.
Smart sound controls
To access a series of settings:
CINEMA, MUSIC, SPEECH and
return to PERSONAL.
Smart picture controls
To access a series of settings:
RICH (when the room is very
light), NATURAL (optimum
conditions), SOFT (when the
room is very dark) and return to
PERSONAL.
Menu
To call up or exit from the menus.
Use and to adjust.
The menus disappear automatically
after 30 seconds if no further
command is given.
Select EXT sockets
Press several times to select EXT
sockets (see p.7).
Timer
To select an automatic standby
period (from 0 to 240 minutes).