Specifications

54
For questions or more product information, call 201.549.1160 or 800.230.9497, email [e-mail]
or visit us at www.citytheatrical.com
Dimmer
The SHoW DMX Three Channel 10A Dimmer provides three independently controllable 10A 9-12V DMX/RDM DC dimmers in a
single compact package with a total capacity of 30 amps. With its four different output configurations, the SHoW DMX Three
Channel 10A Dimmer can be used as three individual 10A DC dimmers for incandescent loads, as three individual linear curve
dimmers, as three individual non-dims, or as three individual LED dimmers. Additionally, any two outputs are usable as 15A
dimmers, or any single output is usable as a 30A dimmer. In LED mode, the units are perfect for controlling low voltage LED RGB
tape, or other types of RGB LEDs.
• User-selectable output formats
• Built-in level test and bump buttons
• RDM access to DMX address, configuration,
battery voltage and other functions
• Mounting/hanging bracket included
Outdoor Use Transceiver
The SHoW DMX Neo Outdoor Use Transceiver provides a compact and economical solution with unparalleled flexibility and
configurability when a permanent outdoor use wireless DMX distribution system is needed. The SHoW DMX Neo Outdoor Use
Transceiver can be quickly and easily configured in the field at installation as a transmitter or receiver. Then the system’s quick
and comprehensive RDM proxy and responder functions can be used to monitor and adjust all SHoW DMX Neo units in the
system directly from the control position, without accessing or opening the boxes after installation.
• NEMA 4X/IP66 Stainless Steel Enclosures with all required
liquid tight cable entries
• Delivered ready for contractor installation
• FCC, IC and CE compliant
• ETL Listed
• A complete range of high gain outdoor antennas
and extension cabling is available
OEM
The SHoW DMX Neo Radio Module for OEM applications provides a simple and low cost way for manufacturers to add high quality
wireless DMX to their products with a single miniature printed circuit board. This very small PCBA incorporates all of its
configuration and control functions as well as its RF DMX hardware and firmware and requires very little external hardware,
software, or space for direct integration in a Host product. All SHoW DMX Neo configuration is done with RDM commands, and
the external connection, power, and DMX I/O hardware requirements are minimal. City Theatrical offers complete application
materials as well as development hardware kits and reference designs to support your application development.
• Small footprint: 1.65”x 2.71”x 0.25” / 42mm x 69mm x 6.5 mm
• RDM Configurable
• City Theatrical engineering services are available to guide you
The 5706 SHoW DMX Neo OEM Receiver is a miniature Wireless DMX Receiver PCBA for use in custom designs such as set
pieces, props and costumes, and will support all of the key operating features of the SHoW DMX Neo Receiver. All settings are
also configurable via RDM commands from a separate
RDM controller
SHoW DMX Neo
Outdoor Transciever
Cat. #5708
Three Channel Dimmer
Cat. #5620
Single Channel Dimmer
is also available.
Cat. #5520
SHoW DMX NEO SHoW DMX NEO
™
Neo
Transceiver and Receiver
SHoW DMX Neo is the newest generation of wireless DMX.
SHoW DMX Neo combines high data fidelity, advanced
user configuration to minimize its broadcast footprint,
blazing fast speed with 7ms or less latency, and industry
leading RDM capability.
Nearly every production on Broadway and London’s West
End that uses wireless DMX uses SHoW DMX, as well as
many of the world’s largest music tours. When their show
depends on it, lighting professionals choose City Theatrical
and SHoW DMX.
SHoW DMX Neo
Transceiver
Cat. #5701
Lighting professionals trust SHoW DMX
®
Three broadcast formats to suit your needs
SHoW DMX Neo Mode, SHoW DMX Neo Adaptive Mode, SHoW DMX Classic Mode
High Data Fidelity
SHoW DMX’s utilizes a unique patent pending Synchronized Hopping method that
has never been surpassed in data fidelity.
Ultra Fast Throughput
SHoW DMX Neo’s latency is 7ms or less. That’s a full 88% faster than our original
SHoW DMX systems
Adaptive Hopping Mode
In Neo Adaptive Mode, the system will automatically broadcast only on open channels,
neither causing interference, nor interfering with other sources.
Plays Well with Others
SHoW DMX Neo is the only wireless DMX system that gives full control to the user.
You can insure the fidelity of your show while creating the smallest wireless DMX
footprint and respecting the broadcast needs of others.
Transceiver
• Patented 2.4 GHz FHSS radio transceiver,
optimized for broadcasting DMX.
• Three broadcast settings: SHoW DMX Neo
Mode, SHoW DMX Neo Adaptive Mode, SHoW
DMX Classic Mode (which is compatible with all
SHoW DMX legacy products)
• Can be configured as either a Transceiver or a
Receiver
• RDM: Monitor and change your system with any
RDM controller
• Ethernet Gateway features include dual Ethernet
ports, support of multiple Ethernet protocols
including Art-Net, sACN, and KiNet
• USB port for easy firmware updates
Receiver
• All SHoW DMX Neo wireless DMX features
• All SHoW DMX Classic wireless DMX features,
configurable to work with all existing SHoW DMX
systems
• Fast and reliable wireless RDM proxy and
responder functions
• Universal mains (100-240VAC 50/60 Hz) or
12VDC CL 2 power (using adapter or batteries)
• USB port for easy firmware updates
SHoW DMX Transceivers are covered by U.S. Patent # 7,432,803 and other patents pending.
SHoW DMX Neo
OEM Receiver
Cat. #5706
(for props and costumes)
SHoW DMX Neo
Radio Module for OEM
Cat. #5792
(for direct integration
by manufacturers)
Call us for complete
OEM ordering
information.