Specifications

Directions for Use
EN 11L03.2U AA 3.
HOW TO USE THE SOUND CONTROLS (20MS233S ONLY)
12
Sound
Treble Boost On
Bass Boost Balance AVL Sound
Treble Boost
Balance
Bass Boost
R
L
AVL
On or Off
Sound
Mono
or Stereo
On or Off
On or Off
T
o adjust your TV sound, select and use the Sound Menu Controls listed below.
1
Treble Boost: Press the  or 
buttons to turn the control On or Off. When On, the control will enhance the high frequency sounds.
2
Bass Boost: Press the  or 
buttons to turn the control On or Off. When On, the control will enhance the low frequency sounds.
3
Balance: Press the  or  but-
tons to adjust the level of sound com- ing from the left and right speakers.
4
AVL: (Auto Volume Leveler) Press
the  or  buttons to turn the
control On or Off. When On, AVL will level out the sound being heard when sudden changes in volume occur during commercial breaks or channel changes.
5
Sound: Press the  or  buttons
to select between Stereo or Mono settings. Note: If Stereo is not pres- ent on a selected show and the TV is placed in the Stereo mode, the sound coming from the TV will remain in the Mono mode.
NOTE: These sound options are
only available in model 20MS233S.
They are not available in 13MT143S
or 20MT133S.
H
OW TO
U
SE THE
P
ICTURE
A
DJUSTMENT
C
ONTROLS
11
T
o adjust your TV picture controls, select a
channel and use the Picture Menu Controls
listed below:
1
Brightness: Press the CURSOR
RIGHT
3
or LEFT
2
buttons
until the darkest parts of the picture are as bright as you prefer.
2
Color: Press the CURSOR
RIGHT
3
or LEFT
2
buttons
to add or eliminate color.
3
Picture: Press the CURSOR
RIGHT
3
or LEFT
2
buttons
until lightest parts of the picture show good detail.
4
Sharpness: Press the CURSOR
RIGHT
3
or LEFT
2
buttons to
improve detail in the picture.
5
Tint: Press the CURSOR RIGHT
3
or LEFT
2
buttons to obtain
natural skin tones.
6
Color Temp: Press the CURSOR
RIGHT
3
or LEFT
2
buttons
to select NORMAL, COOL, or WARM picture preferences. (NOR- MAL will keep the whites, white; COOL will make the whites, bluish; and WARM will make the whites, reddish.)
7
Contrast +: Press the CURSOR
RIGHT
3
or LEFT
2
buttons to
toggle the control On or OFF. The Contrast + control helps to “sharp- en” the picture quality. The black portions of the picture become rich- er in darkness and the whites become brighter.
Picture
Brightness Color Picture Sharpness
Tint
Color Temp.
50
Brightness
65
Color
50
Picture
50
Sharpness
50
Color Temp.
Normal
Warm
or
Cool
Contrast +
On
Off
Tint
0