@ l-: m~' Distributor: The distributor confirms the contents of the User Manual with the user before installation, and make sure to hand the User Manual over to the user after installation.
@ +Some of the beam pattern with LED fog is within the applicable scope of car inspection. However;as the inspection apparatus s incomplete in some car inspection stations, sometimes the inspector's visual inspection is required to make judgment, where allure to pass the car inspection may scour occasionally I this case, please restore the original halogen bub.
@ Precautions, please read carefully A CAUTION ~ Dot touch the LED part of the product with hands; keep the lamp clean and dry + Don't get the illuminating part of the product wet. »Please replace the product under the safe condition. +Make the replacement after changing to parking gear,putting on the hand brake, stop the engine, lamp switch off and key removed. +Don't stretch the cable with excessive force. »Keep properly the replaced halogen bulb.
@ Installation (1) Remove the halogen bulb out of the fog luminary, according to the User Manual of the hide (2) Install the LED fog lamp into the luminary: LED boomer Driver bax Corrector T product s parity-Fee design. (3) Connect the connector of the LED fog with the socket of the vehicle. Connector o ED og Socket o vice Fix the driver box part tort the bracket by using the plastic tie.
