User manual

60mm
40mm
Min60mm
6
• Check to make sure that the inside diameter of the
air-tight cover for your lamp is at least 60 mm. If it is too
small, there is the risk of unsuccessful installation of the
heat sink and the control box.
Pre-installation Information
• The LED-HL [≈H11] lamp is not for use with all types of
cars. Please consult a professional sales representative.
• Please have a technician at a professional service
location install the LED-HL [≈H11] lamp.
• If it is found after the LED-HL [≈H11] lamp is installed
that there is no cut-off line for the low-beam light
pattern, please switch back to your prior halogen H11 lamp.
• Applicable car types: Please refer to the overview of
applicable cars.
Figure-1
4