User manual

50mm
26mm
Min60mm
8
• Check to make sure that the inside diameter
of the air-tight cover for your lamp is at least
60 mm. If it is too small, there is the risk of
unsuccessful installation of the heat sink and
the control box.
• The LED-HL [=HIR2] lamp is not for use with all
types of cars. Please consult a
professional sales representative.
• Please have a technician at a professional service
location install the LED-HL [=HIR2] lamp.
• If it is found after the LED-HL [=HIR2] lamp is
installed that there is no cut-o line for the
low-beam light pattern, please switch back to
your prior halogen HIR2 lamp.
• Applicable car types: Please refer to the overview
of applicable cars.
Pre-installation Information
4