User manual

13
If the LED-HL [=HIR2] lamp does not turn on,
please check if any of the following conditions exists:
1. Are all the wire harness and connector connected?
2. Check if the power switch for the lamp is turned on.
3. Make sure that there is sucient power in
the battery.
Troubleshooting
6
• Put on the air-tight cover for the lamp.
• Place the removed halogen lamp into the white
empty box.
• Check if the lamp works nonnally and if the light
pattern is okay. If the light pattern is too low or
too high, adjust the horizontal adjustment knob
for the lamp the position is correct.