User manual

4
Warning
• The burner body and LED surface can reach very high temperatures. Do not touch the
area with the hands or allow any skin contact as it may result in severe burns. Do not
touch the LED ribbon bonding area! (Refer to picture below)
• The LED light intensity is very high while turned on. Do not look directly into the beam to
avoid damage to the eyes.
• Do not wash the vehicle when the headlights are turned on. Changes in temperature may
cause damage to or an unexpected reaction from the LED headlight.
• Do not expose the surface of the LED bulb to dust or oils, or cause the surface to bear
shock or otherwise become damaged.
• Keep out of reach of children.
• Warning – Do not touch this area
Other Information
• Please ensure that the product comes from a legal sales channel.
• After installation, check that the high and low beams, the ash function, and other
electrical equipment on the dashboard work and that no warnings occur. If anything
abnormal happen, Philips LED CANbus adapter could be a solution.
• After installation, ensure that the waterproof gasket is tted correctly to reduce the risk of leakage.
• Do not bend the cables excessively, especially near the heat sink area.