Item Brochure

Pico tting guide

Achieving the right t with Pico is easy; just follow the instructions below to get started.

See OIS tting guide for complete instructions.

Before putting on the mask, make sure the cushion ts the width of

your nose without blocking your nostrils. The top of the cushion may

sit between the bridge and tip of your nose.

Pull the headgear on over your head and gently place the cushion

over your nose.

Next, connect Pico to the exible tubing that came with your sleep

therapy device. Some air leaking is normal. Adjust the side headgear

straps to reduce leaks around your eyes.

Disconnect the headgear clips by twisting them away from the frame

like a key and undo the headgear tab by peeling it away from the

headgear strap.

Adjust the top and bottom straps by pulling the tabs back evenly.

The mask should rest lightly on your nose. Do not over-tighten.

The headgear should t loose and comfortable.

Now, while holding the mask in place, connect the headgear clips

by pressing onto the mask frame.

Assume different sleeping positions. Move around until

comfortable. If there are any excessive air leaks, make

nal adjustments while lying down.