Cut Sheet

High Output T12
F72T12 D HO ALTO
Philips T12 fluorescent lamps provide high performance in a wide
range of sizes, shapes, and types.
Product data
• General Characteristics
Base R17d [Recessed Double Contact Bay
(RDC Bay-Fluorescent)]
Base Information Green Base
Bulb T12
Rated Avg. Life [3 hr
Start]
12000 hr
Energy Saving Not Applicable
• Light Technical Characteristics
Color Code 54
Color Rendering
Index
79 Ra8
Color Designation Daylight [Daylight]
Color Temperature 6500 K
Initial lumen 5600 Lm
Design Mean Lumens 4850 Lm
• Electrical Characteristics
Watts 85 W
• Environmental Characteristics
Mercury (Hg)
Content
6.8 mg
• Product Dimensions
Nominal Length
[inch]
72
• Footnotes
Footnotes Fluores-
cent/CFL
207 [Approximate initial lumens are
for 800 ma. operation. For 1000 ma.
operation, lumens are approximately
10% higher and watts approximately
15% higher. (207)]
Footnotes Fluores-
cent/CFL
214 [Econ-o-watt® lamps are only
recommended for use on high power
factor lead, indoor ballasts that meet
ANSI standards. The lamps are not
recommended for use in drafty areas,
or locations where the ambient
temperature is less than 60°F, except
as noted. Also they should not be
operated on low power factor
ballasts, reduced light or reduced
current ballasts, dimming ballasts or
emergency system inverter ballasts.
(214)]
• Product Data
Product number 366534
Full product name F72T12 D HO ALTO
Short product name F72T12 D HO ALTO/15
Pieces per Sku 1
eop_pck_cfg 15
Skus/Case 15
Bar code on pack 46677366537
Bar code on case 50046677366532
Logistics code(s) 927893205402
eop_net_weight_pp 0.001 kg