Manual

1 2
3
5
4
© 2019 Signify Holding.
All rights reserved. This document contains information relating to the product portfolio of Signify which information may
be subject to change. No representation or warranty as to the accuracy or completeness of the information included herein
is given and any liability for any action in reliance thereon is disclaimed. The information presented in this document is not
intended as any commercial ofer and does not form part of any quotation or contract. Philips and the Philips Shield
Emblem are registered trademarks of Koninklijke Philip
s N.V.. All other trademarks are owned by Signify Holding or their
respective owners.
Signify Holding.
The Netherlands
L600 、L1200、L1500 2x
L1800 3x
L600 、L1200、L1500 2x
L1800 3x
7 15
7 15
Min. 2x1,0mm
Max. 2x2,5mm
Φ8—Φ12.4
TWI：Min. 3x1,0mm
Max. 3x2,5mm
LED18S LED25S
LED25S
TW1
LED34S
LED34S
TW1
LED36S
LED36S
TW1
LED56S
LED56S
TW1
LED80S
Inom (mA) 70 95 95 125 125 140 140 220 220 300
Imax (A) 2.5 2.3 2.3 2.9 2.9 3 3 3.6 3.6 4.4
Tref(μs) 95 105 105 110 110 101 101 122 122 136
MCB
B-10A 35 32 10 28 10 28 10 25 10 13
B-16A 55 50 10 45 10 45 10 40 10 20
C-10A 55 50 10 45 10 45 10 40 10 20
C-16A 94 85 10 77 10 77 10 68 10 34
Electrical characteristics
Luminaire Max.
≈3Nm




- The luminaire shall be installed by a qualied electrician and
wired in accordance with the latest IEE electrical regulations
or the national requirements.
- The LED driver is not serviceable and not replaceable.
- The light source of this luminaire is not replaceable; when the light
source reaches its end of life the whole luminaire shall be replaced
- Luminaire must not be used or stored in corrosive environments where
hazardous materials such as sulphur, chlorine, phthalates, etc, are present.