Cut Sheet

WARNINGS AND CAUTIONS
• Suitable for use in wet locations
• Not for use in totall enclosed luminaires
• Before replacing, turn o power and let lamp cool to
avoid electrical shock or burn
CAUTION: Risk of electric shock
NOTES: This device complies with Part 15 of the FCC rule. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This Class B complies with Canadian ICES-005.
© 2018 Signify Holding. All rights reserved. Signify
reserves the right to make changes in specications and/
or to discontinue any product at any time without notice
or obligation and will not be liable for any consequences
resulting from the use of this publication.
PLt-16223BN 06/18 philips.com/lighting
Philips Lighting North America Corporation
200 Franklin Square Drive, Somerset, NJ 08873
Tel. [phone]
Philips Lighting Canada Ltd.
281 Hillmount Rd, Markham, ON, Canada L6C 2S3
Tel. [phone]
FF0002
DQD 507 Rev. 2012-05-22 Page 1
Certificate of Compliance
Certificate: 2662008 Master Contract: 155397
Project: 2662008 Date Issued: September 27, 2013
Issued to: Philips Lighting Company, A Div. of
200 Franklin Square Dr.
Somerset, NJ 08873
USA
Attention: J. Cyre
The products listed below are eligible to bear the CSA Mark shown
with adjacent indicators 'C' and 'US' for Canada and US or with adjacent
indicator 'US' for US only or without either indicator for Canada only
Issued by:
Robin Huang
PRODUCTS
CLASS 3426 36 - LUMINAIRES- Luminaire Fittings LED Tubular Lamp Retrofit Kits
LED tubular lamps as direct replacements for 25W/48T8/HF, 28W/48T8/HF, 30W/48T8/HF, 32W/48T8/RS;
F32T8, 25W; F32T8, 28W; F32T8, 30W; F32T8, 32W fluorescent lamp type, for dry or damp location use,
Models 9290002840, 9290002841, 9290002842, 9290002862.
The Ballast models that the LED Tubular Lamp can be used with are:
Philips Models: GOPA-2P32-SC, GOPA-4P32-SC, GOPA-2P32-LW-SC, GOPA-4P32-LW-SC, IOPA-2P32-N,
IOPA-4P32-N, IOPA-2P32-LW-N, IOPA-4P32-LW-N, IOP-2P32-N, IOP-4P32-N, IOP-2P32-LW-N, IOP-4P32-
LW-N, ICN-2P32-N, ICN-4P32-N
ULT Models: B232I347HP-A, B432I347HP
GE Models: GE232MAX347-N, GE432MAX347-N
UltraSave Models: UT232347, UT432347
Glass PAR Philips LED lamps
1. Early initial qualication for Energy Star allows for directional lamp life claims
of 25,000 hours (L70) with 3,000 hour actual test data, LM80 data and in-situ
temperature measurements. As the lamps pass Energy Star requirements,
manufacturers may increase the lifetime of a product as dictated by Energy Star
guidelines. See http://www.energystar.gov/index.cfm?fuseaction=products_for_
partners.showLightbulbs for further details. Based on average usage of 3 hrs/day,
7 days/week.
2. Based on photometric testing consistent with IES LM-79. Maximum Beam
Candlepower.
3. Dimmable when using leading and trailing edge dimmers.
(See http://www.philips.com/ledtechguide for compatible dimmers.)
This lamp is ENERGY STAR® Certied.
Footnotes from the front:
* Early initial qualication for Energy Star allows for directional lamp life claims
of 25,000 hours (L70) with 3,000 hour actual test data, LM80 data and in-
situ temperature measurements. As the lamps pass Energy Star requirements,
manufacturers may increase the lifetime of a product as dictated by Energy Star
guidelines. See http://www.energystar.gov/index.cfm?fuseaction=products_for_
partners.showLightbulbs for further details.
** Design life is based on engineering testing and probability analysis
‡ For details, please visit http://www.usa.lighting.philips.com/connect/tools_literature/
warranties.wpd
† Light output comparison based upon the ENERGY STAR® Integral LED Lamp Center
Beam Intensity Benchmark tool which can be found at EnergyStar.gov/LEDbulbs, LED
Light Bulbs for Partners, Program Requirements PDF Pg. 11.