User's Manual

power and display the monitor’s state.
Green — Power On mode.
Flash Green — Stand-by mode, Suspend mode, or Off mode.
• MENU :
Active OSD menu or function adjust confirm.
•
CONTRAST
/
:
Adjust contrast or function adjust.
•
BRIGHTNESS
/
:
Adjust brightness or function adjust.
• HIGH BRIGHTNESS
:
Under non-OSD, press this key will
enable High Brightness function. It will be disable when you press the
key again.
• EXIT :
Exit a function or inactive OSD menu. Under non-OSD,
display the current mode.
How to adjust a setting
The monitor controls are accessed by pressing button MENU to enable OSD
(On-Screen-Display). The main menu will be displayed as follows.
Figure 4 Chinese OSD Message Figure 5 English OSD Message
Note:
If adjustment or selection of any OSD menu is not made for more than
10 seconds, the current setup will be saved and the OSD will disappear
automatically.
Adjusting the picture
The description for functional control icons
1. SIZE AND POSITION
：
1.1 H-CENTER
：
Adjust the horizontal position of the picture.