User's Manual
FCC ID: A3KM108
Pin Assignment
1. The digital only connector contains 24 signal contacts organized in three rows of
eight contacts. Signal pin assignments are listed in the table:
2. The 15-pin D-sub connector (male) of the signal cable:
Pin
No.
Signal
Assignment
Pin
No.
Signal
Assignment
Pin
No.
Signal
Assignment
1
T.M.D.S.
Data2-
9
T.M.D.S.
Data1-
17
T.M.D.S.
Data0-
2
T.M.D.S.
Data2+
10
T.M.D.S.
Data1+
18
T.M.D.S.
Data0+
3
T.M.D.S.
Data2/4 Shield
11
T.M.D.S.
Data1/3 Shield
19
T.M.D.S.
Data0/5 Shield
4
No connect
12
No connect 20 No connect
5
No connect
13
No connect 21 No connect
6
DDC Clock
14
+5V Power 22
T.M.D.S. Clock
Shield
7
DDC Data
15
Ground (for
+5V)
23
T.M.D.S.
Clock+
8
No connect 16 Hot Plug Detect 24
T.M.D.S.
Clock-
Pin
No.
Assignment
Pin
No.
Assignment
1
Red video input
9
DDC +5V
2
Green video input
10
Logic ground
3
Blue video input
11
Identical output -
connected to pin 10
4
Identical output -
connected to pin 10
12
Serial data line
(SDA)
5
Cable detect
13
H. Sync / H+V
6
Red video ground
14
V. Sync
7
Green video ground
15
Data clock line
(SCL)