User's Manual

ManualsBrandsPhilips Electronics Industries ManualsLED & LCD TVs15" Color LCD TV/Monitor





&.'"-

Product Features





150MT





• Multi video input allowing display of PC, DVD, VCD, VCR and TV



• Picture in Picture (PIP) function



• Super-high brightness and fast response time



• AUTO adjustment optimizes picture quality



• 100-page Teletext (in areas where teletext service is available)





RETURN TO TOP OF THE PAGE



Technical Specifications* 





LCD PANEL 





• Type



TFT LCD



• Screen size



15" visual



• Pixel Pitch



0.297 x 0.297mm (15.0")



• LCD Panel type



1024 x 768 pixels

R.G.B. vertical stripe

Anti-glare polarizer hardness



• Effective viewing area



304.1 x 228.1mm (15.0")



• Display Colors



8 bits interface (16M colors)



SCANNING



• Vertical refresh rate



56Hz-76Hz



• Horizontal frequency



30KHz-61KHz



VIDEO





• Video dot rate



80 MHz



• Input impedance



- Video



75 Ohm



- Sync



2K Ohm



• Input signal levels



700m Vpp



Summary of content (10 pages)

PAGE 1
& .
PAGE 2
• Sync input signal Separate sync Composite sync • Sync polarities Positive and negative • Input Frequency XGA Hsync 60 - 76 Hz (N.I.) SVGA Hsync 56 - 75 Hz (N.I.) VGA Hsync - 76 Hz (N.I.) • Video interface 48- 61 KHz, Vsync 35- 50 KHz, Vsync 31- 38 KHz, Vsync 60 D-sub, S-Video, TV-RF, SCART or composite and components video AUDIO • Input level for PC/SVHS/SCART 500 mV nominal • Headphone out signal level 4mW max. • Loudspeaker 2x2.
PAGE 3
H. freq (KHz) Resolution V. freq (KHz) 31.469 640*350 70.086 31.469 720*400 70.087 31.469 640*480 59.940 35.000 640*480 67.000 37.861 640*480 72.809 37.500 640*480 75.000 35.156 800*600 56.250 37.879 800*600 60.317 48.077 800*600 72.188 46.875 800*600 75.000 49.700 832*624 75.000 48.363 1024*768 60.004 56.476 1024*768 70.069 60.023 1024*768 75.
PAGE 4
® ENERGY STAR compliant. As an ENERGY STAR® Partner, PHILIPS has determined that this ® product meets the ENERGY STAR guidelines for energy This monitor is RETURN TO TOP OF THE PAGE efficiency. Physical Specifications • Dimension (WxHxD) 391 x 366 x 200 mm (incl. Pedestal) • Weight 5.1 Kg • Tilt (Forward / Backward) - 5° / 25° • Power supply 100 — 240 VAC, 50/60 Hz • Power consumption 48 W (typ.
PAGE 5
8 7 Green video ground Blue video ground Data clock line (SCL) 15 RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its components.
PAGE 6
Front View Product Description Activate PIP (Picture in Picture) window and select size 1 PIP 2 PCTV/Video TV/Video mode 3 VIDEO SOURCE 4 TV/Video source selection Power switch On/Off 5 Increase or decrease the channel number 6 Automatically adjust the H/V position, phase and clock setting 7 8 MENU OK Side View Increase or decrease the level of audio volume Open the OSD and select the
PAGE 7
Headphone Jack LINE OUT Jack RETURN TO TOP OF THE PAGE Rear View
PAGE 8
1 DC 12V DC 12V power in 2 PC - Video D-Sub input 3 PC - Audio PC Stereo input 4 S-VIDEO (L) AV audio (L) S-VIDEO (R) AV audio (R)
PAGE 9
5 S-VIDEO 6 S-VIDEO in EXTERNAL/ EURO-AV 7 75 SCART connection (for Europe only) TV Antenna or CATV cable in RETURN TO TOP OF THE PAGE Optimizing Performance • For best performance, ensure that your display settings are set at 1024x768@60Hz (for 15") or 1280x1024, 60Hz (for 18"). Note: You can check the current display settings by pressing the "OK" button once. Go into the Product Information. The current display mode is shown on the item called RESOLUTION.
PAGE 10
Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.