246V5 www.philips.
Table of Contents 1. Important........................................ 1 1.1 Safety precautions and maintenance................................... 1 1.2 Notational Descriptions.............. 2 1.3 Disposal of product and packing material............................................ 3 2. Setting up the monitor................ 4 2.1 Installation...................................... 4 2.2 Operating the monitor................. 6 2.3 Remove Base Stand and Base.. 8 3. Image Optimization....................
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important Service off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance center. • Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold. • In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.
1. Important Warning This icon indicates the potential for bodily harm and tells you how to avoid the problem. All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into mono materials. Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. 2.1 Installation Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. Package contents Register your product and get support at www.philips.com/welcome 246V5 2. Attach the base column with the monitor until it clicks into position. Monitor User’s Manual 使用产品前请阅读使用说明 Contents: © 2016 User’s Manual Monitor drivers 保留备用 P jke nkl i Koni ps hili s ht ig ed .
2.
2. Setting up the monitor Description of the On Screen Display 2.2 Operating the monitor What is On-Screen Display (OSD)? Front view product description On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Model 246V5LHAB Main menu Input Picture Sub menu VGA DVI (available for selective models) HDMI (available for selective models) Picture Format Wide Screen, 4:3 Brightness 0~100 Contrast 0~100 SmartResponse Off, Fast , Faster, Fastest (available for selective models) SmartContrast On, Off Gamma 1.8, 2.0, 2.2, 2.4, 2.
2. Setting up the monitor Resolution notification 2.3 Remove Base Stand and Base This monitor is designed for optimal performance at its native resolution, 1920 × 1080 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 × 1080 @ 60 Hz for best results. Remove the Base Stand Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury.
2. Setting up the monitor Note This monitor accepts a 100mm × 100mm mounting interface. 100mm 100mm Caution For use only with UL Listed Wall Mount Bracket with minimum weight/load 3.
3. Image Optimization 3. Image Optimization 3.1 SmartContrast What is it? A unique technology that dynamically analyzes displayed content and automatically optimizes an LCD monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds. Why do I need it? You want the very best visual clarity and viewing comfort for every type of content.
4. Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type TFT-LCD Backlight LED Panel Size 24" W (61 cm) Aspect Ratio 16:9 Pixel Pitch 0.277 × 0.277 mm SmartContrast 10,000,000:1 Response Time (typ.) 5ms SmartResponse 1ms (GtG) (246V5LHAB/246V5LDSB) Optimum Resolution 1920 × 1080 @ 60Hz Viewing Angle 170° (H) / 160° (V) @ C/R > 10 Display Colors 16.
4.
4. Technical Specifications Environmental ROHS EPEAT Packaging Specific Substances Energy Star(The regulations may differ depending on your country) Compliance and standards Regulatory Approvals Cabinet Color Finish YES YES (www.epeat.net refer to note 1 for more details) 100% recyclable 100% PVC BFR free housing YES CE Mark, FCC Class B, CU-EAC, SEMKO, TCO Certified, ETL, ISO9241-307,BSMI Black Glossy Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.
4. Technical Specifications 4.1 Resolution & Preset Modes Maximum Resolution 1920 × 1080 @ 60 Hz (analog input) 1920 × 1080 @ 60 Hz (digital input) Recommended Resolution 1920 × 1080 @ 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720 × 400 70.09 31.47 640 × 480 59.94 35.00 640 × 480 66.67 37.86 640 × 480 72.81 37.50 640 × 480 75.00 37.88 800 × 600 60.32 46.88 800 × 600 75.00 48.36 1024 × 768 60.00 60.02 1024 × 768 75.03 44.77 1280 × 720 59.86 63.
5. Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: Power Management Definition VESA Mode Video H-sync V-sync Power Used LED Color ON Yes Yes 19.
6. Customer care and warranty of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 6. Customer care and warranty 6.
6. Customer care and warranty Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
6. Customer care and warranty 1.
6. Customer care and warranty 6.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
7. Troubleshooting & FAQs 7. Troubleshooting & FAQs • Check to see if the monitor cable has bent pins. • Make sure the computer is turned on. 7.1 Troubleshooting AUTO button doesn't function • This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. The auto function is applicable only in VGA-Analog mode.
7. Troubleshooting & FAQs Image appears distorted. Text is fuzzy or blurred. Main Controls. It is valid only in VGA mode. Horizontal flicker appears • • Adjust the image using the “Auto” function in OSD Main Controls. Green, red, blue, dark, and white dots appears on the screen • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode. • • You can adjust “power on” light using the power LED Setup in OSD main Controls.
7. Troubleshooting & FAQs • Open 'Advanced Properties' and set the Refresh Rate to 60 Hz, then click OK. • Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1920 × 1080 @ 60 Hz. • Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. • Turn on your monitor and then turn on your PC. Ans.: In general it is recommended that the panel surface is not subjected to excessive shocks and is protected from sharp or blunt objects.
7. Troubleshooting & FAQs 3. User Define; the user can choose his/her preference color setting by adjusting red, green blue color. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. Note A measurement of the color of light radiated by an object while it is being heated. This measurement is expressed in terms of absolute scale, (degrees Kelvin).
© 2016 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
