User's Manual

Quick Installer Guide for Philips miniPCI 802.11a/b/g card - 26 -
Figure 8 (User Information – LEAP)
2. Controls on the Security Screen
Field Description
Disable Radio button Disables the encryption
Leap radio button Enables Leap security
User Name Enter the leap user name
Password Enter leap password
Confirm Password Confirm the password for leap
Domain Name Enter the leap domain
802.1x radio button Enables 802.1x security
Pre-Shared Keys Enables static security
Default Key to Use Used to identify which encryption key (Key1-
Key4) is to be used by default.
Alphanumeric or Hexadecimal Key
selection Radio Buttons
Allows user to select either of the two WEP Key
character Entry modes.
Key 1-4 edit controls Used to enter up to four encryption keys for the
selected profile. Keys must contain only hex digits.
Each key’s length is specified in the drop-list to its
right.
Key 1-4 length drop-lists Used to select the length of the corresponding key
field. There are three choices: 10, 26, or 32 hex
digits.
3. Interaction of Security Screen Controls
(1) Checking of ‘Disable’ radio button causes Security to be disabled and causes all other
screen controls to become disabled.
(2) Selecting ‘Leap’ radio button will enable controls related to Leap
(3) Selecting ‘802.1x’ radio button causes 802.1x to be enabled and all other screen
controls to become disabled.
(4) Selecting ‘Pre-Shared Keys’ causes the section under static keys to be enabled and all
other controls disabled.
(5) Upon initial display of the Security screen(for Pre-Shared Keys), previously entered
key values will not be displayed. Each hex digit in these keys will be displayed as an
asterisk (*) character.
(6) Any modification to a key that is displayed as asterisk characters will cause the key
value to be erased. The new key must be entered in its entirety.