User's Manual
PHILIPS 802.11a/b MiniPCI Card WLAN
22
DRAFT
5.3 TCP/IP Setup
After configuring the Philips miniPCI Wireless Network Adapter through the Network Control Panel,
the TCP/IP address for the network device must be configured.
3. Open the “Control Panel” and click “Network and Dial-up Connections.”
4. Find the “Local Area Connection” that is associated with the Atheros AR5001 11a/b miniPCI
Wireless Network Adapter. Right-click that connection, and click Properties.
5. Select “Internet Protocol (TCP/IP)” and click Properties.