User's Manual

Bluetooth Compact Flash Card Page 40 of 51
business card information by selecting from the full list of contacts in your Pocket Outlook
database. If an Outlook contact is not available, then the data found in “My Information” of
the device is used to form contact information. If the user deletes the contact entry, a runtime
message appears the next time you attempt to send a business card.
3.2.6 Serial Port Tab
Figure 3-12: Serial Port Tab
§ Let other devices use this service (Checked by default) —Check this box to allow other
devices connect via the serial port. If unchecked, you can still connect with other devices.
§ Authorization required (Checked by default)—Check this box if you want to screen any
unbonded devices prior to allowing a connection via the serial port. If checked, you will
be prompted to “accept” or “reject” transactions by any unbonded devices (See “Figure 3-9:
“Authorization Dialog.”).
§ Passkey is required (Unchecked by default)—Check this box to require authentication for
connections via the serial port. If checked, you will be prompted to “accept” or “reject”
transactions by any unbonded devices (See “Figure 3-10: Passkey Required.”). Unbonded
devices will be required to supply a matching passkey.
§ Encryption is required—Enabled only when you check “Passkey is required.” Check this
box to enable data encryption when transmitting data.
§ COM ports—Identify the virtual COM (Communications) ports associated with a Bluetooth
serial port connection. The Inbound COM port is used when other devices initiate a serial
connection to the Bluetooth Compact Flash Card. The Outbound COM port is used when
you initiate a serial connection to other devices.