User's Manual

A-2
HOW DO I DETERMINE THE VERSION NUMBER OF THE LINK MANAGER
PROTOCOL (LMP)?
x In the Windows System Tray, right click the Bluetooth icon and select
Configuration from the popup menu.
x In the Bluetooth Configuration window, on the Hardware tab, in the Device
Properties section, the seventh entry provides LMP version number information.
x The eighth entry contains the LMP sub version number information,
if appropriate.
HOW DO I FIND INFORMATION ABOUT THE BLUETOOTH HARDWARE ATTACHED
TO MY COMPUTER?
x In the Windows System Tray, right click the Bluetooth icon and select
Configuration from the popup menu.
x In the Bluetooth Configuration window, on the Hardware tab, in the
Devices section:
 Column one—contains the hardware name.
 Column two—contains the hardware type (USB, Serial, etc.)
x In the Devices Properties section:
 The first entry is the hardware manufacturer.
 The second entry contains the firmware version of the hardware.
 The third entry, Device Status, indicates that the device is operating properly
or that there is a problem/conflict.
HOW DO I TEST A NETWORK ACCESS CONNECTION?
If the client is hardwired to the LAN, unplug the connection to ensure that the test checks
the wireless connection rather than the hardwired connection.
If the server has access to the Internet, open a browser on the client and connect to the
World Wide Web.
You may also Ping the server from the DOS prompt.
WHY DO I GET AN UNKNOWN PORT MESSAGE WHEN I ATTEMPT TO USE A
BLUETOOTH SERIAL PORT?
The “Unknown Port” error message usually means an attempt was made to connect a
port that was in use.