User's Manual

3-28
3-3.2.1 Pair Devices before First Connection
To pair your computer with a remote device before the first connection:
1. Right-click the BTTray icon in the Windows system tray and choose the Security
option. The Bluetooth Security window is displayed (Figure 2, page 3).
2. In the Found Devices list, click the name of the remote device to be paired, for
example, My Laptop. Scroll down if necessary. The list displays all remote
devices currently within radio range. As needed, click the Refresh button to
update the list.
3. Click the
Execute Pairing>> button. A Passkey Request dialog box appears.
4. Set the Passkey Request dialog box options as follows:
a) In the Bluetooth Passkey field, key a valid passkey—a valid passkey is
1 to 16 characters, for example, 2468.
NOTE: A passkey is like a Personal Identification Number
(PIN). The same number must be entered as a
passkey on the remote device being paired.
b) To pair the device with authorization to use all the local services on your
computer, click the check box labeled Check this box to ALWAYS allow
this device to access ALL the services of your computer. Press
Advanced button to select trusted services.
OR
To pair the device with authorization to use selected local services, click the
Advanced >> button (Figure 10) and select the services by clicking the
check box next to each service name.
Figure 10: Security > Pair Devices > Passkey Request dialog box (composite).