User's Manual

3-21
3-2.6.1 Modify Client Application Properties
The options in the Application Properties dialog boxes (Figure 9) are the same for all
applications except for the Bluetooth Serial Port application, which has an additional
COM Port setting.
To change a client application’s properties:
1. Open the Configuration window. The General tab is displayed.
2. Click the Client Applications tab.
3. Double-click an Application Name to open the Application Properties
dialog box.
4. Make the change(s).
5. Click the dialog box
OK button.
6. Click the Configuration window Apply or OK button to confirm the change.
Figure 9: Configuration > Client Applications tab > Application Properties dialog box.
The client application properties, which may be changed, include:
x Security:
 Encryption—check the box to require the use of encrypted links when
sending data. Disabled is the default (box not checked). Authentication is
automatically selected.
 Authentication—check the box to require remote devices to authenticate
when a connection is established with this application. The remote device
and your computer will be required to exchange passkeys. Once the devices
authenticate, they become paired and no further authentication is required
unless the pairing is broken. Disabled is the default (box not checked).