User's Manual

3-17
The service properties, which may be changed, include:
x Startup—check the box to start the service when the system is initialized.
Enabled is the default (box checked). If the box is not checked, the service can be
manually started.
x Security:
 Authorization—check the box to require confirmation when a remote device
wants to use this local service. Disabled is the default (box not checked).
Authentication is also automatically selected.
 Encryption—check the box to require the use of encrypted links to send data
when this service is used. Disabled is the default (box not checked).
Authentication is also automatically selected.
 Authentication—check the box to require remote devices to authenticate
when a connection is established with this service. The remote device and
your computer will be required to exchange passkeys. Once the devices
authenticate, they become paired and no further authentication is required
unless the pairing is broken. Disabled is the default (box not checked).
x Maximum Connections—from the drop-down list choose the maximum number
of connections this service may use.
NOTE: The Maximum Connections option is only available
to the Network Access service.
x Modem—from the drop-down list choose a modem this service should use.
NOTE: The Modem option is only available for the Dial-Up
Networking and Fax services.
x COM Port—click the down arrow at the right end of the COM Port field and
select any port not in use by the system.
NOTE: The COM Port option is only available for the
Bluetooth Serial Port service and user-defined
serial services.
x Service Name—select the service name to highlight it and key a valid and unique
name between 1 and 99 characters, for example Other Service. Typically, this
option is used only when creating a user-defined serial service.