User's Manual

3-16
3-2.5 LOCAL SERVICES TAB
The local services provided by your computer to remote devices are specified in the
Local Services tab. Each service can be configured individually for security, name, and
other settings. The Local Services tab window and Service Properties dialog box are
shown in Figure 8 on page 18.
The Local Services tab also includes options to add and delete user-defined
serial services.
The local services are shown in Table 2:
Table 2: BTW Local Service Names.
Bluetooth for Windows Local Service Names
BTW
Local Service Name
Bluetooth Specification
Equivalent
Bluetooth
Acronym
Bluetooth Serial Port Serial Port Profile SPP
Dial-Up Networking Dial-up Networking DUN
Fax Fax FAX
File Transfer File Transfer Protocol FTP
Information Exchange OBEX Push/Pull OPP
Information Synchronization OBEX IrMC Sync SYNC
Network Access Local Area Network Access using Point-to Point
Protocol
LAP
3-2.5.1 Modify Local Service Properties
The properties’ settings that are common to all the local services are:
x Security:
 None (leave all security boxes unchecked).
 Authentication only.
 Authentication and Authorization.
 Authentication and Encryption.
 Authentication, Authorization, and Encryption.
x Startup—box checked (the default) causes the service to start when your
computer is started.
x Service Name.
Additionally, some local services have additional properties:
x Network Access—has one additional setting for Maximum Connections.
x Dial-Up Networking—has one additional setting for Modem.
x Fax—has one additional setting for Modem.
x Bluetooth Serial Port—has one additional setting for COM Port.
To change a local service’s properties:
1. Open the Configuration window. The General tab is displayed.
2. Click the
Local Services tab.
3. Double-click a Service Name to open the Service Properties dialog box.
4. Make the change(s).
5. Click the dialog box
OK button.
6. Click the Configuration window Apply or OK button to confirm the change.