User's Manual

3-7
3-2.2 ACCESSIBILITY TAB
Specify which remote devices may access your computer.
NOTE: Security settings configured in the General, Local Services, and Client
Applications tab also determine which devices may discover and access
your computer.
The Accessibility tab options include:
x Let other Bluetooth devices discover this computer—the default configuration
(the box to the right of the field is checked) allows remote devices to discover
your computer. It is unavailable if the Allow option, No devices to connect,
has been chosen.
x Allow—to change this option, click the down-arrow located at the right end of
the Allow field and choose one of the following:
 All devices to connect—this is the default setting.
 No devices to connect—your computer can still initiate a connection request
to a remote device, but a remote device will not be able to connect to your
computer and discover or use it’s local services.
 Only paired devices to connect—see Section 3.2 for a description of how
devices are paired.
 Only devices listed below to connect—only specific device(s) selected by the
Add Device feature are allowed to access your computer. Section 2.2.1
describes how to add and delete the specific remote device(s).
3-2.2.1 Control Which Devices Can Discover Your Computer
When only specific remote devices should have access to your computer, choose the
Allow option Only devices listed below to connect and use the Add Device feature.
Access can be taken away from the remote device(s) through the Delete feature.
3-2.2.1.1 Add Device
To allow specific remote devices to access your computer:
1. Open the Configuration window. The General tab is displayed.
2. Click the
Accessibility tab.
3. Click the down-arrow located at the right end of the Allow field and choose
Only devices listed below to connect.
4. Click the Accessibility tab Add Device button.
5. The Devices with access... dialog box (Figure 3, page 8) lists the remote devices
found in the last Bluetooth Neighborhood device search. Scroll through the list
and choose a device.
6. Click the
OK button on the dialog box.
7. Click the Configuration window Apply or OK button to confirm the
remote device addition.
Repeat the process to add additional devices to the list.