User's Manual

2-8
2-4.3.2 Setup—Windows 98SE & Windows Me
Internet Protocol routing software is required on Windows 98SE and Windows Me
servers; a downloadable trial version of WinRoute Lite is available on the Tiny Software,
Inc. website—
http://www.tinysoftware.com/.
Configure the server:
1. From the Windows Control Panel, double-click the Network icon.
2. On the Configuration tab, select TCP/IP-> Bluetooth LAN Access Server Driver
(scroll down if necessary).
3. Click Properties and select the IP Address tab.
4. Select Specify an IP address and:
 Enter an IP Address (suggested value—192.168.1.1).
 Enter a Subnet Mask (suggested value—255.255.255.0).
5. Click OK twice to close the dialog boxes.
6. Click YES to restart the computer.
Configure the routing software:
1. In the Windows system tray, right-click the WinRoute icon (
) and select
Administration.…
2. On the Settings tab, select “2nd network adapter”.
3. From the Network adapter drop-down list choose any adapter
and click the Settings button.
4. On the DHCP tab, in the Adapter drop-down list, select the Bluetooth
Windows 9x Adapter.
5. Select Enable DHCP Server.
6. Fill in the client IP address range fields:
 From—210
 To—240
7. Click OK and then minimize (do not close) the WinRoute Administration
configuration panel.
2-4.3.3 Connect to the LAN
To open a Network Access connection:
1. Double-click Search for Devices.
2. Right-click the server that will provide the hardwired connection and select
Discover Available Services.
3. Double-click the Network Access icon.
4. Enter a user name and password, if necessary, and click OK.
It may take 20 to 30 seconds to establish the connection.
To close a Network Access connection:
1. Double-click the Network Access icon.
2. Click OK.