User's Manual

(Appendix)
Detailed Specifications of NetDVR
1. General
Hardware 32bit RISC Embedded processor
Flash memory: 8Mbyte
RAM: 16Mbyte
OS: Embedded Linux
Storage Device HDD (3.5inch)
Video Channel NTSC or PAL video format are supported
4Ch. External Video Input (BNC Connector)
Image Resolution 720X486, 720X243, 360X243, 180X121, 90X60
Image Compression Compression Algorithm: Wavelet
Compression Rate: 10:1 ~200:1
Performance Transfer Rate: Max up to 30fps(NTSC) / 25fps(PAL)
Recording Rate: Max up to 30fps(NTSC) / 25fps(PAL)
Security Password (Based User Authentication)
IP-filtering (Secure Mode)
Alarms and I/O Motion detection (With one Channel)
Software-controlled 2 digital inputs
MISC. function High quality image area setting
Image quality Control (10 Levels)
Power Supply DC 12V, 3.5A via external power supply
2. Network
Viewer/Browser i-Rec CamViewerII (included)
MS windows 98/ME/2000/NT
Connector 10 Based-T Ethernet (RJ-45)
Installation Assign as IP address setup program or ARP/ RARP protocol
Protocols supported TCP/IP, ARP, RARP, ICMP, and DHCP
S/W Update Flash memory allows central remote software updates over the network
using FTP or private 'i-RecUpgrade'
Management Configuration is achieved by private setup program, embedded in '
i-Rec CamViewer II'
3. Mechanical
Dimension HxWxL = 67mm x306mm x280mm
Weight 3.4 Kg(1 without HDD)
4. Compatible external devices and software
PTZ control 1 Ch. RS232, 1 Ch. RS422, 1 Ch. RS485
Multiple PTZ devices are supported via RS485
Sensor input 4 auxiliary inputs are supported