User's Manual

2) Recorded image monitoring
(1) Total recorded data indication
- This indicates the date, time, and the starting point to the finishing point of recorded data.
- The frame information is indicated as time.
(2) Scroll bar for section movement
- A scroll bar may be moved within range of the whole designated data.
- You can monitor the frame of specific hours easily if you move to the specific section among every section
with scroll bar.
- You can select the range as 5 minutes/10 minutes /15 minutes /30 minutes /1 hour, using the buttons.
- The scale below the section movement scroll bar is the recording from the starting point to finishing point.
- The width of scroll bar is equal to current selected part.
(3) Selected data indication
- Scale is to indicate the time information of the selected data.
(4) Scroll bar for frame movement
- By using the scroll bar, you may move to the relevant frame.
- When you drag the scroll bar and click a frame or click on the time in the ‘selected data indication’ panel.
(5) Total recorded status indication
- The depth of color the in frame information indicates frame rate. As the recording rate is higher, the depth
of color is denser.
- If MD or Sensor is activated, the image information is indicated with red point among the recorded images.
(4)
(3)
(5)
(2)
(1)